Specifications
Table 9 ET1000A Mechanical and Environmental Specifications
Category | Specification | |
Interfaces | (2) Gigabit Ethernet ports for encrypting and decrypting traffic | |
| (single mode, multimode, or copper) | |
| 10/100 Mbps | |
| ||
| (1) Auxiliary Gigabit port for data traffic (not enabled) | |
| (1) Gigabit Ethernet port for management (not enabled) | |
ET1000A | 19 inch rack mount design | |
Electrical/Mechanical | 1U tamper evident chassis | |
Dimensions | ||
Dimensions: 1.75” H x 17” W x 10” D | ||
| ||
| Weight: 6 pounds | |
| ||
| Nominal power dissipation: 65 watts | |
| Nominal input current: 1.0A | |
| Thermal power: | |
ET1000A | 19 inch rack mount design | |
Electrical/Mechanical | 1U tamper evident chassis | |
Dimensions | ||
Dimensions: 1.75” H x 17” W x 15.5” D | ||
| ||
| Weight: 10 pounds | |
| ||
| Nominal input power: 72 watts | |
| Maximum power: 90 watts | |
| Nominal input current: 0.65 A @ 110V | |
| Thermal power, single power supply: | |
| state 222 BTU/hour | |
| Thermal power, dual power supplies: | |
| state 263 BTU/hour | |
Environmental | Operating temperature: 0 to 40 degrees C (32 to 104 degrees F) | |
| Operating humidity: Up to 90% | |
| Operating altitude: | |
Regulatory | See “ET1000A Regulatory Information” on page 81 and “ET1000A | |
| Regulatory Information” on page 81. | |
|
|
ETEP Installation Guide | 23 |