Black Box ET0100A, ET0010A Unpacking the Shipping Carton ET1000A, Rack Mount Installation ET1000A

Installation

NOTE

To meet the requirements of FCC Part 15 and the EU EMC Directive 2004/108/EC, use only shielded Category 5 cables with the ET1000A Ethernet management port.

Unpacking the Shipping Carton: ET1000A

Remove all product components from the shipping carton and compare the contents to the packing list. Keep all packaging in case it is necessary to return the unit.

The ET1000A is packaged with the standard items listed below. Additional cables, country-specific power cords, SFPs, and other accessories can be ordered separately. A list of approved transceivers is included in the ETEP Release Note.

1ET1000A chassis

• Firmware and software is factory-installed on the unit.

2Accessory Kit

•

•

•

•

•

Rack mount kit includes 2 mounting brackets, 4 large screws (#10-32), and 8 small black screws

(2) Power cables (US)

(1) 6 ft. shielded DB-9 null modem cable (female to male)

(1)6 ft. shielded Category 5 straight through cable (STP) with RJ-45 connector CD containing user documentation and a backup copy of the ETEP software

Rack Mount Installation: ET1000A

The ET1000A can be mounted in a standard 19-inch rack using the mounting kit, or simply placed on a rack shelf or solid surface. Before installing the ET1000A in a 19-inch rack, review the rack-mounting guidelines listed in “ETEP Site Preparation” on page 28.

To mount the ET1000A in a standard 19-inch equipment rack, have the following tools and materials available:

•

•

•

Two mounting brackets, supplied in the Accessory Kit

8 small black screws and 4 large #10-32 screws, supplied in the Accessory Kit #1 Phillips and #2 Phillips screwdrivers (user-supplied)

CAUTION

In order to safely and securely and install the ET1000A in a rack, you must use the mounting brackets supplied in the Accessory Kit. Other brackets may fail to properly support the weight of the ET1000A.

42 ETEP Installation Guide