Model W1790
3⁄8" Reversible Air Drill
Instruction Sheet
Phone #: (360)
| EYE INJURY HAZARD! | |
| Always wear safety glasses during | |
| use to prevent serious personal | |
| injury! |
|
| INJURY HAZARD! |
|
| Always disconnect tool from air to | |
| prevent unexpected operation dur- | |
| ing service! |
|
| INJURY HAZARD! |
|
| Never exceed 120 PSI! | |
Specifications |
| |
Drive Size | 3⁄8" | |
No Load Speed | 1800 RPM | |
Average Air Consumption | 6 | |
CFM Required PSI | 90 PSI | |
Air Inlet | 1⁄4" NPT | |
Inventory |
| |
A. | Air Drill | 1 |
B. | 1⁄4" NPT Quick Connect Fitting (male) | 1 |
C. | Chuck Key | 1 |
Lubrication
Lubricate your air drill with pneumatic tool oil. If you do not have a lubricator installed in your air line, place one drop of pneumatic tool oil into the air fitting daily, as shown in Figure 2.
Figure 1. Model W1790.
Quick | Quick | Lubricator | |
Connector | Connector | Regulator | |
Your |
|
| Air |
Tool |
|
| Compressor |
Quick |
|
|
|
Coupler |
| Quick |
|
| Air Hose | Filter | |
| Coupler | ||
|
| ||
Figure 2. Installing your tool.
Figure 3. Lubricating directly into air
fitting.
COPYRIGHT © JUNE, 2007 BY WOODSTOCK INTERNATIONAL, INC.
| WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT | |
#9580JM | THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. | Printed in China |
