Sanyo DSR - 300 manual Alarm REC Mode SET, When alarm recording settings have been completed

8ALARM REC MODE SET

[Settings] (‹ indicates default setting.)

Setting	Description
‹OFF	Audio recording is not carried out
ON	Audio recording is carried out

[Setting conditions]

zThis can be set whenever the recording rate is 10.00 FPS or more for field recording, or 5.00 FPS or more for frame recording.

7 Move the cursor to “ALARM RECORDING” and press the [ ] button, then press the [ ] or [ ] button to change the setting.

[Settings] (‹ indicates default setting.)

Setting	Description
‹OFF	Does not perform alarm recording.
	Always performs alarm recording, regardless
ENABLED	of whether or not timer recording is being
	performed.
AL-REC ON	Performs alarm recording only during timer
TIMER	recording.
AL-REC OFF	Performs alarm recording only when timer
TIMER	recording is not being performed.
* DLY AL-REC	Performs alarm recording only for the amount
ON TMR	of time set by the timer. Normal recording is
	not performed.

*“DLY AL-REC ON TMR” is enabled just by making timer settings. There is no need to press the [TIMER] button.

8 Move the cursor to “REC RATE” and “DURATION” and press the [ ] button, then press the [ ] or [ ] button to change the setting.

The maximum number of images (shown in parentheses) changes in accordance with the new settings.

Maximum number of images

[Settings]

Setting	Description
	60.00 to 0.03 FPS (for	Sets the recording
REC RATE	field recording)
	30.00 to 0.02 FPS (for	rate.
	frame recording)
DURATION	1 second to 15 minutes,	Sets the recording
	*CC	time per alarm.

*CC: Operates while an alarm is being activated.

When alarm recording settings have been completed

Press the [EXIT/OSD] button.

The display returns to the normal screen. “ALARM” appears in the operation display area.

When an alarm occurs, the number of alarms is displayed.

Number of alarm recordings

Alarm display

10- 20- 04	ALARM	0000
08: 30: 00	EN	10FPS

zIf a new alarm occurs during alarm recording Recording switches from the previous alarm image to the new alarm image in a seamless process. If a number of different alarms occur, these are treated as a single alarm until an alarm interruption occurs.

zSettings cannot be made for “PRE-ALARM RECORDING” when “ALARM RECORDING” is set to “OFF”.

zThe alarm history (recording list) displays up to the last 9,999 items. (Although the history can record up to 16,000 items, only 9,999 of these can be displayed on- screen.)

zWhen the normal recording area is set to “*1%”, alarm recording is performed for as long as space is left in the alarm recording area. For “1%” and other settings, up to 16,000 items are recorded per hard disk.

English 65