Sanyo DSR - 300 Setting overwrite permission, Setting overwriting for the normal recording area

3RECORDING AREA SET

Setting overwrite permission

By default, when all of the space in the hard disk’s normal recording area and alarm recording area has been used up, repetitive overwriting is automatically started (resulting in the older data being replaced).

However, it may be desirable to prevent overwriting in such a case when recorded images are to be checked or edited. To do this, follow the procedure described below to allow only a single overwrite for each recording area.

1 Using <RECORDING CONDITIONS SET> from the menu, set “OVERWRITE” for the “NORMAL RECORDING AREA” or “ALARM RECORDING AREA” to “OFF”.

zWhen this setting has been made, it will ensure that the front panel’s FULL or ALARM FULL space warning indicator will flash when the hard disk’s remaining space is indicated in the operation display.

2 Select “3. RECORDING AREA SET” from <MAIN MENU 1> and press the [ ] button.

The <RECORDING AREA SET> screen appears.

Setting overwriting for the normal recording area

3 Move the cursor to “AREA FULL RESET” under “NORMAL RECORDING AREA”, then press the [ ] button.

A <WARNING> screen appears with “NO” flashing.

AREA FULL

RESET

Flashing

4 Press the [ ] or [ ] button to select “YES”, then press the [ ] button.

The “NORMAL RECORDING AREA” is setup for possible overwriting.

Setting overwriting for the alarm recording area

5 Move the cursor to “AREA FULL RESET” under “ALARM RECORDING AREA”, then press the [ ] button.

A <WARNING> screen appears with “NO” flashing.

6 Press the [ ] or [ ] button to select “YES”, then press the [ ] button.

The “ALARM RECORDING AREA” is setup for possible overwriting.

To finish this process

7 Press the [EXIT/OSD] button.

The display returns to the normal screen.

zTo allow automatic overwriting, set “OVERWRITE” for “NORMAL RECORDING AREA” or “ALARM RECORDING AREA” to “ON”.

zWhenever “AREA FULL RESET” is carried out, the “NORMAL RECORDING AREA” and the “ALARM RECORDING AREA” are setup for possible overwriting. The “ARCHIVE AREA” is initialized and images are deleted.

English 55