2.INSTALL YOUR WIRELESS PROJECTOR SERVER (WPS)
Step 1) Hardware Installation.
Step 2) Make software USB Flash (PnS Token) by yourself.
Step 3) Software Installation. Choose one of the following:
i.Install the software using the USB Flash (Recommended)
ii.Install the software from the WPS (2nd Option)
Note: It’s recommended to install the software using the USB flash (Fast and Easier). However we only provide 2 USB flash disks, therefore we provide second option to install the software from the WPS. If you need more USB flash disks, you can build your own USB Flash disks, refer Chapter 4: Make a New USB Flash Disk with Client Software (PnS Token).
2.1 Hardware Installation
1.Use the mounting bracket and screws to mount the Wireless Project Server (WPS) on the wall. (Skip this step if this is not required.).
2.Connect the supplied antenna to the antenna connector located at the back of the WPS (labeled as ‘ANT’). Fasten and adjust the antenna to make it perpendicular to the ground.
8
