5.6 Network Setup
You can setup network parameters in this page.
Description of every setup items are listed below:
Obtain an IP | Choose this item to obtain the IP address for this projector server | |
address | automatically from the DHCP server on local network. If you don’t | |
have a DHCP server on local network, you have to select ‘Use the | ||
automatically | ||
following IP address’ and setup the IP address manually. | ||
| ||
Use the following IP | Choose this item to setup a fix IP address for this project server | |
address | manually. You have to input IP address, subnet mask, and the IP | |
| address of gateway manually. If you don’t know how to input these | |
| values, please ask network administrator. | |
DHCP Server Setup | You can choose to enable or disable the | |
| client computers. You can choose ‘Auto’ to let | |
| server decide by itself, or choose ‘Disable’ if you want to use other | |
| DHCP server on the network. Please note that if you have clients | |
| using wireless network to connect to this projector server, please | |
| choose ’Auto’. | |
| If DHCP server is enabled, please check your IP range (‘Start IP’ and | |
| ‘End IP’). |
37