Edimax Technology WP-S1000 user manual

Wireless Setup	You can configure the wireless network. Available settings are:
	Region: Select the country of your residence, this will affect available
	wireless radio channel. Selecting a different country may offend local
	radio regulation and cause legal problem.
	SSID: You can change the Service Set Identifier (SSID, the name
	used to identify this projector server from other wireless devices) by
	input another SSID here. Default SSID is WPS. (No space is
	allowed)
	Channel: You can change the channel number of wireless network
	from dropdown menu here. Available channels will vary depending
	on the region you selected. You can select ‘Auto’ to let projector
	server decides which channel to use.
	WEP: Select the wireless encryption level and key type. Available
	options are 128bit (13 ASCII characters or 26 Hexadecimal
	characters) and 64bit (5 ASCII characters or 10 Hexadecimal
	characters). You can also select ‘Disable’ to let everyone connect to
	the projector server wirelessly without the encryption.

Key: Input the WEP key here. Required number or characters will vary depending on the encryption level and key type.

GateKeeper This projector server has a built-in firewall to isolate wireless users and LAN. If you select ‘All Pass’, wireless users connected to this projector server will be able to access the wired Ethernet network connected to this projector server; if you select ‘All Block’, wireless users will not be able to access the wired Ethernet network, to keep privacy (this is also the default setting). If you want to let guests to access to the Internet, you can select ‘Internet Only’, to let guests visit web pages on internet through the wired Ethernet network connected to this projector server. (Refer Appendix on set up the projector server to the Internet).

After setting up the above configurations, please click ‘Apply’ and then ‘Reboot System’ to allow all changes take effect.

38