Edimax Technology WP-S1000 user manual Back View

Back View

PWR: Push this button to switch on the WP-S1000 projector server (the ‘POWER’ led at the front panel will lit), push this button again to switch off the projector server.

5V DC: Connects to the power connector of power adapter. WARNING: Only use the power adapter comes with product package, DO NOT replace with other power adapter!

VGA: Connects to the video cable of your projector or CRT / LCD monitor (15-pin D-sub connector).

AUDIO: Connects to the audio cable of external speaker or audio amplifier. (3.5mm audio connector)

LAN: Connects to your local area network (LAN) by network cable. (RJ-45 network connector)

RESET: When the projector server is not working properly, you can use this button to

clear all settings and restore the WP-S100 to factory default settings: Switch the projector server off, press and hold the RESET button using a pen or pin, then switch the projector server on. You should still press and hold ‘RESET’ button, after 10 seconds you can release the RESET button, and all settings in the projector server will be restored to factory default.

ANT.: Connects to the antenna, please only use the antenna in the product package. If you need to use other antenna to improve radio reception, please make sure the antenna you’re using is designed for 2.4GHz radio band. (R-SMA connector)

7