5 Specifications
Note
•• Specifications are subject to change without notice
Output | VGA, QVGA |
resolution |
|
Lens | F2.8 |
Frame rate | 30 fps at VGA, QVGA |
Focus mode | 0.4m |
Focus range | 1 m to infinity |
Video | h.264 |
format |
|
Connectivity | |
Power | DC 5V, 600mA; |
supply | Model name: |
| |
| (z = a, b, c, and e) |
| a direct |
| with USB output terminal |
| and a different country plug |
| type ('a'=America, 'b'=Britain, |
| 'c'=Australia, 'e'=Europe) |
Dimensions | 35.9 x 83.8 x 34.3mm |
(w x h x d) |
|
Net weight | approx. 52g |
Operating | 0 to 40 degrees celsius |
temperature |
|
Software | iOS 4.3, iPhone 3GS and up, |
supported | iPod Touch 4th generation or |
| above |
| Android 2.2 or above |
6 Troubleshooting
Warning
•• Risk of electric shock. Never remove the casing of the monitor.
To keep the warranty valid, never try to repair the monitor yourself.
If you have problems using this monitor, check the following points before you request service. If you still have a problem, register your monitor and get support at www.philips.com/support.
Cannot connect the monitor to a
•If the monitor blinks amber, you can
•If the monitor still does not work or is blinking green or amber, you may need to reset the monitor by pressing the reset button with a thin object (i.e. paper clip) on the back of the monitor, hold this for more than 4 seconds. After that, repeat 4–
•Philips In.Sight supports general WEP, WPA and WPA2. Philips recommends using WPA or WPA2 as these are safest
WPA2 if you are not able to connect, refer to your router’s user manuel.
•To improve wireless performance, avoid using a
•Keep away from potential sources of interference which may affect
•Unlike legacy solutions, In.Sight does not require port forwarding.There is no risk from leaving ports open on the
10EN