Hi-Touch Imaging Technologies CS-300 user manual Device Option, Ab C E Hd F G

[Device Option]

You can modify the settings of the card printer in this page.

AB

C

E

HD

F

G

A.Ribbon Type: Select the ribbon type you want to use. 1. YMCKO ribbon,2. Resin K ribbon or 3. YMCO ribbon.

B.Card Type: Select the card type you want to use. You may choose “Blank Card”, “6-pin Smart Chip Card”, “8-pin Smart Chip Card”, “ Magnetic Stripe Card”, “Chip/Magnetic Card”, and “Adhesive Card”. (Default setting: “Blank Card”)

C.Quality Mode: Quality Mode is the default setting. If you cancel this option, the printing speed will increase, but the quality will decrease.

D.Printing Direction: You can select “Portrait” or “Landscape”. (Default setting:

“Landscape”)

Lock: If you are using a 3rd party software application other than Card Desiree CS and the default printer of your computer is not CS-300, then please enable “Lock” to fix the printing direction.

E.Copies: Set the number of copies to print. (Default setting: 1)

F.Front/ back side setting: Setup which side you want to print.

G.Printing Parameters: Select the printing parameters. When you change the Ribbon type, it will automatically return to the default setting. If □Using YMC is unmarked, only the Resin K and O portion of the YMCKO ribbon will be applied during the printing process.

H.K only on Back: This option is available only for YMCKO ribbons. When it is marked, the front side of the card will be printed by YMC of YMCKO; meanwhile, the back side will be printed by K of YMCKO. Then the user can print out one double-side card by one set of YMCKO (YMC for the front side; K for the back side).

19 www.hi-ti.com