Loop Out setting
When this feature is set to ON, the received signal will be looped out.
Example: Setting “ON”
1.On the MAIN MENU, select “OPTION3”, then press the MENU/ENTER button.
The “OPTION3” screen appears.
2.Use the ▲ and ▼ buttons to select “LOOP OUT”.
3.To set the LOOP OUT to “ON”...
Use the and buttons to select “ON”.
The mode switches as follows each time the or button is pressed:
OFF ↔ ON
|
|
| OPTION3 |
| 3 / 3 | |
| PREVIOUS PAGE |
|
|
| ||
TIMER |
|
|
|
| ||
PWR. ON MODE |
| : | LAST | |||
BUTTON LOCK |
| : | OFF | |||
IR REMOTE |
| : | ON | |||
| LOOP OUT |
|
| : | ON | |
| SEL. | ADJ. |
|
| RETURN | |
|
| EXIT | ||||
Information
LOOP OUT settings
ON ...... The received signal will be looped out via PC1
terminal or VIDEO1 terminal.
OFF .... The received signal will not loop out.
*Even if LOOP OUT is ON, signals won’t be sent out if POWER is being turned off.
To connect another display...
See page 10.
If the RGB/PC1 signal is present at the time the power switched on...
The RGB/PC1 input will be displayed regardless of the setting of LOOP OUT.
Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.
33
