Mitsubishi Electronics PD-6130, PD-5030 manual Orbiter settings, Orbiter Function settings

ORBITER

ORBITER - Uneven phosphor aging/burn-in reduction feature. To minimize the risk of uneven phosphor aging/ burn-in when displaying still images, the Mitsubishi PD- 5030 and PD-6130 offers a built-in feature known as ORBITER. The ORBITER feature intermittently shifts the screen image horizontally and vertically in small increments. This intermittent screen movement is usually not evident in full motion video. In some instances the ORBITER shift might be evident while displaying static guides or menus. The default setting for ORBITER is On (AUTO1). Mitsubishi chose this setting to help reduce uneven phosphor aging. Please do not shut the ORBITER off.

Example: Setting “ORBITER” to “OFF”

Perform Steps 1-2 of Reducing burn-in of the screen, then...

3.Use the ▲ and ▼ buttons to select “ORBITER”.

4.Use the ◀ and ▶ buttons to select “OFF”.

The mode switches as follows each time the ◀ or ▶ button is pressed:

→OFF ↔ AUTO1 ↔ AUTO2 ↔ MANUAL←

			LONG LIFE
PEAK BRIGHT			:	AUTO
	ORBITER		:	OFF
INVERSE			:	OFF
SOFT FOCUS			:	OFF
		SEL.	ADJ.		RETURN
				EXIT

Information

⬛ORBITER settings

OFF .............. ORBITER mode does not function.

AUTO1 .......... When a RGB signal is input, the picture

moves around the screen intermittently, making the picture smaller.

When a Video or DVD/HD/DTV signal is input, the picture moves around the screen intermittently. But in this case, it will affect only the moving picture and will not make the screen smaller.

AUTO2 ......... When a RGB signal is input, the picture

moves around the screen intermittently, making the picture bigger.

When a Video or DVD/HD/DTV signal is input, the picture moves around the screen intermittently. But in this case, it will affect only the moving picture and will not make the screen bigger.

MANUAL ...... User can adjust the ORBITER functions

(Horizontal Dot, Vertical Line and Time) manually. See the following explanation.

Adjust the ORBITER function manually

Set the amount of shift and the time between movement.

Example: Setting so that the picture moves 2 dots horizontally and 3 lines vertically every 3 minutes.

Perform Steps 1-3 of ORBITER, then...

4.Use the ◀ and ▶ buttons to select “MANUAL”, Then press the MENU/ENTER button.

The “ORBITER” screen appears.

5.Adjust the items using the ▲▼◀ and ▶ buttons.

The mode switches as follows each time the ◀ or ▶ button is pressed:

• H-DOT

→1 DOT ↔ 2 DOT ↔ ..... ↔ 19 DOT ↔ 20 DOT←

• V-LINE

→1 LINE ↔ 2 LINE ↔ ..... ↔ 19 LINE ↔ 20 LINE←

• TIME

→1 M ↔ 2 M ↔ 3 M ↔ 4 M ↔ 5 M←

	ORBITER
H-DOT	:	2 DOT
V-LINE	:	4 LINE
TIME	:	3 M

SEL. ADJ. EXIT RETURN

Information

⬛ORBITER Function settings

H-DOT	Moves from 1 to 20 dots in the
	horizontal direction.
V-LINE	Moves from 1 to 20 lines in the vertical
	direction.
TIME	Interval of 1~5 minutes (1 horizontal
	dot or 1 vertical line per interval).

INVERSE

Use this to set the inverse mode or to display a white screen.

Example: Setting “INVERSE” to “WHITE”

Perform Steps 1-2 of Reducing burn-in of the screen, then...

3.Use the ▲ and ▼ buttons to select “INVERSE”.

4.Use the ◀ and ▶ buttons to select “WHITE”.

The mode switches as follows each time the ◀ or ▶ button is pressed:

→OFF ↔ ON ↔ WHITE←

			LONG LIFE
PEAK BRIGHT			:	AUTO
ORBITER			:	OFF
	INVERSE		:	WHITE
SOFT FOCUS			:	OFF
		SEL.	ADJ.		RETURN
				EXIT

26