Mitsubishi Electronics PD-5030, PD-6130 manual Option1 Settings Menu, Setting the on-screen menu

Information

When “AUTO PICTURE” is “OFF”

MONITOR SETTINGS

ASPECT MODE		: STANDARD
V-POSITION
H-POSITION
V-HEIGHT
H-WIDTH		:
AUTO PICTURE
FINE PICTURE
PICTURE ADJ.
SEL.	ADJ.			RETURN
			EXIT

When Auto Picture is off, the Fine Picture and the Picture ADJ. items are displayed so that you can adjust them.

Adjusting the Auto Picture

ON	The Picture ADJ., Fine Picture and
	Position adjustments are made
	automatically.
	Not available for digital ZOOM.
OFF	The Picture ADJ., Fine Picture and
	Position adjustments are made
	manually.

*If FINE PICTURE can’t be adjusted, set AUTO PICTURE to OFF and adjust manually.

Adjusting the position of the image

V-POSITION ...Adjusts the vertical position of the image.

H-POSITION ... Adjusts the horizontal position of the image.

V-HEIGHT .......Adjusts the vertical size of the image.

(Except for STRETCH mode) H-WIDTH ......... Adjusts the horizontal size of the

image. (Except for STRETCH mode)

FINE PICTURE* .. Adjusts for flickering.

PICTURE ADJ.* ... Adjusts for striped patterns on the image.

*The PICTURE ADJ. and FINE PICTURE features are available only when the AUTO PICTURE is off.

*TheAUTO PICTURE, FINE PICTURE and PICTURE ADJ. are available only for RGB signals.

These features are not available for moving pictures on VIDEO, HD/DVD or RGB.

Restoring the factory default settings

Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults except for Auto Picture.

Option1 Settings Menu

Setting the on-screen menu

This sets the position of the menu, the display format (horizontal or vertical) etc.

Example: Turning the DISPLAY MENU off

1.On the MAIN MENU, select “OPTION1”, then press the MENU/ENTER button.

The “OPTION1” menu appears.

2.Use the ▲ and ▼ buttons to select “MENU”, then press the MENU/ENTER button.

The “MENU” menu appears.

3.Use the ▲ and ▼ buttons to select “DISPLAY MENU”.

4.To set the DISPLAY MENU to “OFF”...

Use the
and  buttons to select “OFF”.

The mode switches as follows each time the
or  button is pressed:

ON ↔ OFF

	MENU
DISPLAY MENU	:	OFF
MENU ADJUST	:	1
MENU ORBITER	:	OFF

SEL. ADJ. EXIT RETURN

Information

DISPLAY MENU settings

ON	The on-screen menu appears.
OFF	The on-screen menu does not appear.

If you press the INFO button on the remote control for more than 3 seconds the main menu will appear and can be set (although it is not ON).

MENU ADJUST settings

Adjusts the screen position of the menu.

The position can be set between 1 to 6.

MENU ORBITER settings

ON ........ The position of the menu will be shifted by

eight dots each time it is displayed.

OFF ...... The on-screen menu (OSM) will be

displayed at the same position.

Restoring the factory default settings

Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults except for AUTO PICTURE.

21