Information
⬛INVERSE Settings
ON ......... The picture is displayed alternately between
positive image and negative image.
You can set the time by pressing the MENU/ ENTER button while “ON” is set.
OFF ....... Inverse mode does not function.
WHITE ...The entire screen turns white.
You can set the time by pressing the MENU/ ENTER button while “ON” is set.
Setting the time for INVERSE/WHITE
Set a time duration.
Example: Set the INVERSE mode to start in 2 hours and proceed for one and a half hours.
1.On the Main Menu, select “OPTION 2”, then press the MENU/ENTER button. The “OPTION 2” screen appears.
2.Use the ▲ and ▼ buttons to select “LONG LIFE”, then press the MENU/ENTER button.
The “LONG LIFE” screen appears.
3.Use the ▲ and ▼ buttons to select “INVERSE”.
4.Use the ◀ and ▶ buttons to select “ON”, then press the MENU/ENTER button.
The “INVERSE/WHITE” screen appears.
5.Adjust the time using the ▲▼◀ and ▶ buttons.
The mode switches as follows each time the ◀ or ▶ button is pressed:
• WORKING TIME
→ON ↔ 00H03M ↔ 00H06M ↔ ..... ↔ 12H42M ↔ 12H45M←
• WAITING TIME
→00H03M ↔ 00H06M ↔ 00H09M ↔ ... ↔ 12H42M ↔ 12H45M←
INVERSE/WHITE |
| |
WORKING TIME | : | 01H30M |
WAITING TIME | : | 02H00M |
SEL. | ADJ. | EXIT | RETURN |
Information
⬛Setting the time
WORKING TIME ..... Set the time duration for
“INVERSE/WHITE”.
When the WORKING TIME is set to “ON” the mode will stay on.
WAITING TIME ...... Set the standby time until the
“INVERSE/WHITE” mode starts.
*The “WAITING TIME” can not be set when the “WORKING TIME” is ON.
*The “WORKING TIME” and “WAITING TIME” can be set for up to 12 hours and 45 minutes in units of 3 minutes.
*At the completion of a WORKING TIME function, the monitor will enter STANDBY mode.
[Example]
WORKING TIME: 01H30M
WAITING TIME: 02H00M
←−−−− 2 H | −−−−→←−− 1.5 H −−→←−−−− |
Start | INVERSE/WHITE Start STAND BY |
⬛To select “ON” for the “WORKING TIME”...
Set the hours of the working time to 0H and the minutes to 0M. “ON” will be displayed.
27
