Setting the allocation of the audio connectors
Setting the AUDIO 1, 2, and 3 connectors to the desired input.
Example: Setting “AUDIO INPUT1” to “VIDEO 2”
1.On the MAIN MENU, select “AUDIO SETTINGS”, then press the MENU/ENTER button.
The “AUDIO SETTINGS” screen appears.
2.Use the ▲ and ▼ buttons to select “AUDIO INPUT1”.
3.To set the AUDIO INPUT1 to “VIDEO2”...
Use the and buttons to select “VIDEO2”.
The mode switches as follows each time the or button is pressed:
The available sources depend on the setting of “BNC INPUT”.
RGB: → VIDEO1 ↔ VIDEO2 ↔ VIDEO3 ↔ HD/DVD1← →MONLINK ↔RGB2 ↔RGB1 ←
COMP.: → VIDEO1 ↔ VIDEO2 ↔ VIDEO3↔ HD/DVD1←
→MONLINK ↔RGB1 ↔HD/DVD2 ←
AUDIO SETTINGS
BASS |
|
|
|
|
|
TREBLE |
|
|
|
|
|
|
|
|
|
| |
BALANCE |
|
|
|
|
|
|
|
|
|
|
|
|
| : | VIDEO2 | ||
AUDIO INPUT1 |
| ||||
AUDIO INPUT2 |
| : | HD/DVD1 | ||
AUDIO INPUT3 |
| : | RGB1 | ||
SEL. | ADJ. |
|
| RETURN | |
| EXIT | ||||
Information
AUDIO INPUT
A single audio input cannot be selected as the audio channel for more than one input terminal.
Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.
Monitor Settings Menu
Adjusting the Position, Size, Fine Picture, Picture Adj
The position of the image can be adjusted and flickering of the image can be corrected.
Example: Adjusting the vertical position in the NARROW mode
1.On the MAIN MENU, select “MONITOR SETTINGS”, then press the MENU/ENTER button.
The “MONITOR SETTINGS” menu appears.
(only for RGB/PC setting)
MONITOR SETTINGS
ASPECT MODE |
| : | NARROW | ||
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
AUTO PICTURE |
| : | OFF | ||
FINE PICTURE |
|
|
|
|
|
|
|
|
|
| |
PICTURE ADJ. |
|
|
|
|
|
|
|
|
|
| |
SEL. | ADJ. |
|
| RETURN | |
| EXIT | ||||
*The settings on the MONITOR SETTINGS menu are not preset at the factory.
To select a mode ...
Use the and buttons to select a mode.
The mode switches as follows each time the or button is pressed:
NARROW ↔ STANDARD
*The mode can also be switched by pressing the FORMAT button on the remote control.
2.To adjust the vertical position ...
Use the ▲ and ▼ buttons to select “V-POSITION”.
MONITOR SETTINGS
ASPECT MODE |
| : | NARROW | |||
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
| ||
AUTO PICTURE |
| : | OFF | |||
FINE PICTURE |
|
|
|
|
| |
|
|
|
|
| ||
PICTURE ADJ. |
|
|
|
|
| |
|
|
|
|
| ||
SEL. | ADJ. |
|
| RETURN | ||
| EXIT | |||||
3. Adjust using the and buttons.
*If neither the or button is pressed within 5 seconds, the current setting is stored into memory and the previous screen reappears.
To continue making other computer image
adjustments ...
Repeat from step 2.
20
