Mitsubishi Electronics PD-6130, PD-5030 Setting the screen size for S1/S2 video input, Soft Focus

SOFT FOCUS

Reduces edges and softens the image.

Example: Setting “SOFT FOCUS” to “2”

1.On the MAIN MENU, select “OPTION2”, then press the MENU/ENTER button.

The “OPTION2” screen appears.

2.Use the ▲ and ▼ buttons to select “LONG LIFE”, then press the MENU/ENTER button. The “LONG LIFE” screen appears.

3.Use the ▲ and ▼ buttons to select “SOFT FOCUS”.

4.Use the ◀ and ▶ buttons to select “2”.

The mode switches as follows each time the ◀ or ▶ button is pressed:

→OFF ↔ 1 ↔ 2 ↔ 3 ↔ 4

		LONG LIFE
PEAK BRIGHT		:	AUTO
ORBITER		:	OFF
INVERSE		:	OFF
	SOFT FOCUS	:	2
	SEL.	ADJ.		RETURN
			EXIT

Information

⬛SOFT FOCUS settings

OFF ............ Turns the SOFT FOCUS function off.

1, 2, 3, 4 ..... Activates the SOFT FOCUS setting. The

higher numbers create a softer image.

Setting the gray level for the sides of the screen Use this procedure to set the gray level for the parts on the screen on which nothing is displayed when the screen is set to the 4:3 size.

Example: Adjusting the “GRAY LEVEL”

1.On the MAIN MENU, select “OPTION2”, then press the MENU/ENTER button.

The “OPTION2” screen appears.

2.Use the ▲ and ▼ buttons to select “GRAY LEVEL”.

3.To adjust the “GRAY LEVEL”...

Use the ◀ and ▶ buttons to adjust the GRAY LEVEL.

			OPTION2		2 / 3
		PREVIOUS PAGE
PWR. MGT.				:	OFF
FILM MODE				:	ON
LONG LIFE
	GRAY LEVEL			:	2
S1/S2				:	OFF
		NEXT PAGE
		SEL.	ADJ.		EXIT	RETURN

Information

⬛GRAY LEVEL settings

This adjusts the brightness of the black (the gray level) for the sides of the screen.

The level can be adjusted from 0 to 15. The factory setting is 2 (gray). This setting helps minimize uneven phosphor aging.

⬛Restoring the factory default settings

Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.

Setting the screen size for S1/S2 video input

If the S-video signal contains screen size information, the image will be automatically adjusted to fit the screen when this S1/S2 is set to AUTO.

This feature is available only when an S-video signal is input via the VIDEO3 terminal.

Example: Setting the “S1/S2” to “AUTO”

1.On the MAIN MENU, select “OPTION2”, then press the MENU/ENTER button.

The “OPTION2” screen appears.

2.Use the ▲ and ▼ buttons to select “S1/S2”.

3.Use the ◀ and ▶ buttons to select “AUTO”.

The mode switches as follows each time the ◀ or ▶ button is pressed:

OFF ↔ AUTO

		OPTION2		2 / 3
	PREVIOUS PAGE
PWR. MGT.			:	OFF
FILM MODE			:	ON
LONG LIFE
GRAY LEVEL			:	2
	S1/S2		:	AUTO
	NEXT PAGE
	SEL.	ADJ.		EXIT	RETURN

28