Reducing noise in the picture
Use these settings if the picture has noise due to poor reception or when playing video tapes with poor picture quality.
Example: Setting “NR-3”
1.On the MAIN MENU, select “VIDEO SETTINGS”, then press the MENU/ENTER button.
The “VIDEO SETTINGS” screen appears.
2.Use the ▲ and ▼ buttons to select “NR”.
|
| VIDEO SETTINGS | 1 / 2 | ||||||
CONTRAST |
|
|
|
|
|
|
| ||
BRIGHTNESS |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| |||
SHARPNESS |
|
|
|
|
|
|
| ||
COLOR |
|
|
|
|
|
|
| ||
TINT |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| |||
PICTURE MODE |
| : | NORMAL |
|
| ||||
| NR | NEXT PAGE |
| : | OFF |
|
| ||
|
|
|
|
|
|
|
|
| |
| SEL. | ADJ. |
| EXIT | RETURN | ||||
3.Use the and buttons to select
The mode switches as follows each time the or button is pressed:
→ OFF ↔
|
|
NR | : |
|
|
*If neither the or button is pressed within 5 seconds, the current selection is stored into memory and the previous screen reappears.
Information
NR
*“NR” stands for Noise Reduction.
*This function reduces noise in the picture.
Types of noise reduction
There are three settings for noise reduction. Each has a different level of noise reduction.
The effect becomes stronger as the number increases (in the order
OFF | Turns the noise reduction function off. |
Setting the color temperature
Use this procedure to set color tone produced by the plasma display.
Example: Setting “HIGH”
1.On the MAIN MENU, select “VIDEO SETTINGS”, then press the MENU/ENTER button.
The “VIDEO SETTINGS” screen appears.
2.Use the ▲ and ▼ buttons to select “NEXT PAGE”.
3.Select “COLOR TEMP”.
4.Use the and buttons to select “HIGH”.
The mode switches as follows each time the or button is pressed:
→ LOW ↔ MID LOW ↔ MEDIUM ↔ HIGH ←
* See below to set “WHITE BALANCE”.
|
|
| VIDEO SETTINGS | 2 / 2 | ||||
|
| PREVIOUS PAGE |
|
|
|
| ||
| COLOR TEMP. |
| : | HIGH |
| |||
|
|
|
|
|
|
|
| |
GAMMA |
|
| : | 2 |
|
| ||
LOW TONE |
|
| : | AUTO |
| |||
COLORVIEW |
|
|
|
|
|
| ||
|
| SEL. |
| ADJ. |
|
| RETURN | |
|
|
|
| EXIT | ||||
*If neither the or button is pressed within 5 seconds, the current selection is stored into memory and the previous screen reappears.
Information
Setting the color temperature
LOW | Redder |
MID LOW | Slightly redder |
MEDIUM | Standard (slightly bluer) |
HIGH | Bluer |
Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.
Adjusting the color to the desired level
Use this procedure to adjust the white balance for each color temperature to achieve the desired color quality.
Example: Adjusting the “GAIN RED” of “HIGH” color temperature
Perform Steps 1-4 of SETTING THE COLOR
TEMPERATURE, then...
5.Press the MENU/ENTER button.
The “WHITE BALANCE” screen appears.
6.Use the ▲ and ▼ buttons to select “GAIN RED”.
WHITE BALANCE
COLOR TEMP. HIGH
GAIN RED |
|
|
GAIN GREEN |
|
|
GAIN BLUE |
|
|
BIAS RED |
|
|
BIAS GREEN |
|
|
BIAS BLUE |
|
|
RESET |
| : OFF |
SEL. | ADJ. | EXIT RETURN |
17
