Mitsubishi Electronics PD-5030 manual Specifications PD-6130

Specifications: PD-6130

Screen Size		53.2"(H)×29.9"(V) inches
		1351(H)×760(V) mm
		diagonal 61"
Aspect Ratio		16 : 9
Resolution		1365(H)×768(V) pixels
Pixel Pitch		0.039"(H)×0.039"(V) inches
		0.99(H)×0.99(V) mm
Color Reproduction		256 levels, 16,770,000 colors
Signals
	Synchronization Range	Horizontal : 15.5 to 110 kHz
		(automatic : step scan)
		Vertical : 50.0 to 120 Hz
		(automatic : step scan)
	Input Signals	RGB, NTSC (3.58/4.43), PAL (B,G,M,N),
		PAL60, SECAM, HD*1 , DVD*1 , DTV*1

Input Terminals (VIDEO1 and RGB1 can also be used as OUTPUT terminals)

	RGB
	Visual 1 (Analog)	mini D-sub 15-pin×1
	Visual 2 (Analog)	BNC (R, G, B, H/CS, V)×1*2
	Visual 3 (Digital)	DVI-D 24-pin×1
	Video
	Visual 1	BNC×1
	Visual 2	RCA-pin×1
	Visual 3	S-Video: DIN 4-pin×1
	DVD/HD/DTV
	Visual 1	RCA-pin (Y, PB[CB], PR[CR])×1*1
	Visual 2	BNC (Y, PB[CB], PR[CR])×1*1, *2
	Audio	Stereo RCA×3 (Selectable)
	RS-232C Control	D-sub 9-pin×1 (RS-232C)
Sound output		9W+9W at 6 ohm
Power Supply		AC120V 50/60Hz
Current Rating		6.7A (maximum)
Power Consumption		540W (typical)
Dimensions		57.9 (W)×34.7 (H)×4.8 (D) inches
		1470 (W)×880 (H)×122(D) mm
Weight		136.9 lbs / 62.2 kg (without stand)
Environmental Considerations
	Operating Temperature	0°C to 40°C / 32°F to 104°F
	Humidity	20 to 80% (no condensation)
	Altitude	0 to 9180 feet / 0 to 2800 m
	Storage Temperature	-10°C to 50°C / 14°F to 122°F
	Humidity	10 to 90% (no condensation)
	Altitude	0 to 9840 feet / 0 to 3000 m
Front Panel User Controls		Power on/off, Input source select,
		Volume up/down/ Menu control
Remote Control Functions		Power on/off, Input source select, Menu
		control,Volume up/down, Adjust (Up,
		Down, Left, Right), Pointer, Zoom up/
		down, Sleep, Wireless/ Wired remote
		control

OSM Functions Picture (Contrast/Brightness/Sharpness/ Color/Tint/ Picture mode/Noise reduction/Color temperature/ White balance/Gamma/Low tone/Color View), Audio (Bass/Treble/Balance/Audio input), Image Adjust (Aspect mode/V-Position /H-Position/V-Height /H- Width/Auto Picture/Fine picture/Picture adjustment), Option1 (Menu/BNC Input/RGB Select/HD Select/ Input Skip/All Reset), Option2 (Power management/ Film mode/Long life [Peak Bright, Orbiter, Inverse, White, Soft focus]/Gray level/S1/S2/Picture size/DVI Set up), Option3 (Timer Power on mode/Button lock/ IR Remote/Loop out, Language*, Color system, Source information

*English, German, French, Italian, Spanish, Swedish, Chinese

	1.9"	2.9"
57.9" (1470)	(48)
		(74)
53.2" (1351)
29.9" (760)	34.7" (880)
		4.8"
		(122)
	Units are in inch
		(mm)

The features and specifications may be subject to change without notice.

*1 HD/DVD/DTV input signals supported on this system

480P (60 Hz)	480I (60 Hz)	525P (60 Hz)
525I (60 Hz)	576P (50 Hz)	576I (50 Hz)
625P (50 Hz)	625I (50 Hz)	720P (60 Hz)
1035I (60 Hz)	1080I (50 Hz)	1080I (60 Hz)

*2 The 5-BNC connectors are used as RGB/PC2 and HD/DVD2 input. Select one of them under “BNC INPUT”.

Supported Signals

•640×480P @ 59.94/60Hz

•1280×720P @ 59.94/60Hz

•1920×1080I @ 59.94/60Hz

•720×480P @ 59.94/60Hz

•720×480I @ 59.94/60Hz

Note: In some cases a signal on the plasma monitor may not be displayed properly. The proglem may be an inconsistency with standards from the source equipment (DVD, Set-top box, etc...). If you do experience such a problem please contact Mitsubishi Digital Electronics, Inc. and also the manufacturer of the source equipment.

Other Features Motion compensated 3D Scan Converter (NTSC, PAL, 480I, 576I, 525I, 625I, 1035I, 1080I), 2-3 pull down Converter (NTSC, 480I, 525I, 1035I, 1080I (60Hz)), 2-2 pull down Converter (PAL, 576I, 625I, NTSC, 480I, 525I), Digital Zoom Function (100-900% Selectable), Self Diagnosis, Anti Image Burn (Peak Bright Lock 1-3, Inverse, White, Orbiter (Auto1,2/Manual), Color Temperature select (high/medium/mid low/low, user has 4 memories), Button lock (Except power SW), Auto Picture, Input Skip, ColorView, Low Tone (3 mode), Programmable Timer, Gamma Correction (4 mode), Loop through interface, Plug and play (DDC1, DDC2b, RGB3: DDC2b only)

Accessories Remote control with two AAA batteries, Power cord, Owner’s guide, Safety metal fitting parts, Ferrite cores, Bands, Cable clamps, RGB cable, Remote cable, Registration card

Regulations UL Approved (UL 60950 and UL65000/CSA C22.2 No.60950-00/ CAN/CSA-E60065-00) DOC Canada requirements

Meets FCC Class B requirements

39