Mitsubishi Electronics PD-6130, PD-5030 manual Cleaning Safeguards, Plasma Display Screen & Cabinet

Cleaning Safeguards

Plasma Display Screen & Cabinet

Please follow the cleaning safeguards listed below to prevent damage to your Plasma Display and retain this document for future reference.

IMPORTANT: No Abrasives!

DO NOT use any kind of abrasive cloth or cleaner or ammonia on the Plasma Display’s screen or cabinet.

Cleaning Your Plasma Display

Normally, light dusting with a dry, non-abrasive cloth will clean your Plasma Display. If cleaning beyond this is needed, please follow these guidelines:

First, turn off the Plasma Display and unplug the power cord from the wall outlet before cleaning.

Cleaning the cabinet of your Plasma Display

•Gently wipe down the Plasma Display with a soft, non- abrasive cloth such as cotton flannel or a clean cloth diaper, lightly moistened with water.

•Dry with a second dry, soft, non-abrasive cloth.

General Cleaning Warnings:

•DO NOT apply pressure to the Plasma Display’s screen.

•DO NOT allow liquid to enter the Plasma Display through the ventilation slots or any crevice.

•DO NOT use any strong or abrasive cleaners because they can scratch the screen and the cabinet.

•DO NOT use any cleaners that contain ammonia, bleach, alcohol, benzene, or thinners because they can damage and dull the surfaces.

•DO NOT scrub or rub the screen or cabinet. Wipe it gently.

IMPORTANT

For further information, assistance in operating your Plasma Display or if you are in need of service, please contact us at www.mitsubishi-tv.com or call Consumer Relations at

800-332-2119