Hi-Touch Imaging Technologies CS-300 user manual Tools, Ab C

[Tools]

AB

C

A. Printing Position Adjuster: You may set the thickness of the card and print out a test chat, then modify parameter [A] or [B] or [C] to adjust the printing position.

※Notice:

1.Please make sure the position of the thickness adjuster on the printer matches the thickness of the card before proceeding to modify parameter [A] or [B] or [C] to adjust the printing position.

2.When you modify the printing position, please note that the red line is not too close to the edge of the card in order to avoid any ribbon damage.

B.Cleaning Tool: You can use the cleaning mode to clean your printer. (Use cleaning cards from HiTi.)

C.Heating Energy: You can set ”YMC Dye”, ” K” parameters, ranging from 1 to

10to decide the color intensity. If you use the YMCKO ribbon, then you can adjust the parameters for YMC and Resin K within the YMCKO ribbon; however, if you decide to use the Resin K ribbon, only Resin K parameters can be adjusted.

25 www.hi-ti.com