AXIS M1054 Network Camera

Troubleshooting

Problems with streaming H.264

Problems with AXIS Media Control (Internet Explorer only)

To enable the updating of video images in Internet Explorer, set the browser to allow ActiveX controls. Also, make sure that AXIS Media Control is installed on your computer.

No H.264 displayed in the

Check that the relevant H.264 connection methods and correct interface are enabled in the AMC

client

Control Panel (streaming tab). See AXIS Media Control (AMC) on page 13.

 

In the AMC Control Panel, select the H.264 tab and click Set to default H.264 decoder.

 

Check that RTSP is enabled under System Options > Network > TCP/IP > Advanced.

Multicast H.264 only

Check if your router supports multicasting, or if the router settings between the client and the

accessible by local clients

product need to be configured. The TTL (Time To Live) value may need to be increased.

No multicast H.264

Check with your network administrator that the multicast addresses used by the Axis product

displayed in the client

are valid for your network.

 

Check with your network administrator to see if there is a firewall preventing viewing.

Installation of additional

Configure the Axis product to use a Java applet for updating video images in your browser. Go to

ActiveX component

Setup > Live View Config and select Java applet under Default viewer.

restricted or prohibited

 

Poor rendering of H.264

Ensure that your graphics card is using the latest driver. The latest drivers can usually be

images

downloaded from the manufacturer’s website.

Color saturation is different

Modify the settings for your graphics adapter. Refer to the adapter’s documentation for more

in H.264 and Motion JPEG

information.

Lower frame rate than

See Performance Considerations on page 60.

expected

Reduce the number of applications running on the client computer.

 

 

Limit the number of simultaneous viewers.

 

Check with the network administrator that there is enough bandwidth available.

 

Check in the AMC Control Panel (H.264 tag) that video processing is NOT set to Decode only

 

key frames.

 

Lower the image resolution.

 

The maximum frames per second is dependent on the utility frequency (60/50 Hz) of the Axis

 

product. See Technical Specifications on page 57.

Status and Network indicator LEDs are flashing red rapidly

 

 

Hardware failure

Contact your Axis reseller.

Video and image problems, general

 

 

Image unsatisfactory

Check the video stream and camera settings under Setup > Video & Audio > Video Stream and

 

Setup > Video & Audio > Camera Settings.

Motion Detection triggers unexpectedly

 

 

Changes in luminance

Motion detection is based on changes in luminance in the image. This means that if there are

 

sudden changes in the lighting, motion detection may trigger mistakenly. Lower the sensitivity

 

setting to avoid problems with luminance.

55

Page 55
Image 55
Axis Communications M1054 user manual Problems with streaming H.264, Key frames, Video and image problems, general

M1054 specifications

Axis Communications has firmly established itself as a leader in the network video surveillance market, offering a wide array of innovative products that cater to various security requirements. One of its noteworthy offerings is the Axis M1054 network camera, which is designed to provide reliable surveillance capabilities while incorporating advanced technologies and features.

The Axis M1054 is a fixed network camera that is particularly well-suited for indoor use. It boasts a compact design that allows for seamless integration into various environments, making it ideal for retail stores, offices, and other commercial spaces. One of its standout features is the ability to deliver high-resolution video, with a 1280x800 resolution at 30 frames per second, ensuring clear and detailed images for effective monitoring.

Equipped with a progressive scan CMOS sensor, the M1054 enhances image quality, providing sharp and vibrant colors. In low-light conditions, the camera continues to perform effectively thanks to its advanced light sensitivity. The built-in electronic day/night functionality automatically adjusts to changing lighting conditions, enabling the camera to maintain high-quality video during both day and night.

In terms of connectivity, the Axis M1054 supports Power over Ethernet (PoE), simplifying installation and reducing cable clutter. This feature allows the camera to receive both power and data through a single Ethernet cable, enabling more flexible placement options. The camera also includes an SD card slot for local storage, providing added redundancy and ensuring critical footage is retained even if network connectivity is lost.

Axis Communications places a strong emphasis on security, and the M1054 is no exception. It features robust security measures, including password protection, IP address filtering, and HTTPS encryption. These features provide a critical layer of defense against unauthorized access, ensuring that recorded video remains secure.

Moreover, the M1054 is compatible with Axis’ wide array of video management software and third-party systems, providing users the flexibility to integrate their surveillance solution into a broader security ecosystem. With its advanced features, reliable performance, and user-friendly design, the Axis M1054 network camera represents an excellent choice for businesses looking to enhance their security measures and ensure peace of mind.