![](/images/new-backgrounds/1288934/28893411x1.webp)
AXIS M1054 Network Camera
Hardware Overview
Hardware Overview
1Lens with Status LED indicator
2Microphone
3Light (white illumination LED)
4PIR sensor
5Speaker
6Network connector
7Lock ring
8Part number (P/N) & Serial number (S/N)
9Power connector
10I/O terminal connector
11Control button
12Power LED indicator
13Network LED indicator
14Wireless LED indicator (activated on wireless models only)
Connectors and Buttons
For technical specifications, see page 57.
Network Connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
NOTICE
The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer’s instructions. For information about regulatory requirements, see Electromagnetic Compatibility (EMC) on page 2 .
I/O Connector
Use with external devices in combination with, for example, tampering alarms, motion detection, event triggering, time lapse recording and alarm notifications. In addition to the 0 V DC reference point and power (DC output), the I/O connector provides the interface to:
6