Xerox 701P21091 manual Options 22. IDR Ilist parameter options and definitions, ’inkname ’

Models: 701P21091

1 498
Download 498 pages 22.54 Kb
Page 261
Image 261

Specifying print format parameters

IDR ILIST

This parameter provides a list of all the inks which may be referenced by indexing in printing variable input data or CME data.

Syntax ac:IDR ILIST = {‘inkname’ (‘inkname1’ [‘inkname2’] [, ...])}

Options

Table 4-22. IDR ILIST parameter options and definitions

Option

Definition

 

 

 

 

inkname

Name of an ink that may be referenced by ink indexing during printing.

 

Can be a solid primary color only.

 

 

Default

IDR ILIST parameter: points to note

No default

The first ink in the ILIST parameter is the default unless it is overridden by an IDFAULT parameter.

The maximum number of ink names that may be specified in the ILIST parameter is 64.

If an IDR parameter is not specified in the OUTPUT command or if the IDR that is specified does not exist, the system supplies DFIDR.IDR as the system default IDR. DFIDR.IDR is a standard file that is provided with the system software. It contains the definition of the system default ‘BLACK’ ink, specified by the following command:

DFIDR: IDR ILIST = ‘BLACK‘;

When the VOLUME command CODE=NONE parameter is specified, an ILIST parameter referencing a highlight color primary causes the entire report to print in highlight mode. If ILIST references only black ink, the report prints in black mode.

Using LCDS Print Description Language

4-21

Page 261
Image 261
Xerox 701P21091 Options 22. IDR Ilist parameter options and definitions, Default IDR Ilist parameter points to note