Xerox 701P21091 Default Output Graphics parameter points to note, Output Idfault, Move, Nosub

Specifying print format parameters

Table 4-56. OUTPUT GRAPHICS parameter options and definitions (Continued)

Option

Definition

Unused options: The following options are ignored by the DP EPS. They are included here for compatibility.

MOVE	Specifies that all referenced graphic disk files will be copied into the print file.
	(On the DP EPS, YES is used instead.)
NOSUB	If a graphic is missing, specifies that no substitution for the missing graphic
	image is desired. (This option is ignored by the DP EPS.)

Default

OUTPUT GRAPHICS parameter: points to note

NO

•If you are using the IMAGE parameter in conjunction with GRAPHICS, make sure to list the GRAPHICS parameter first, as these two parameters are order dependent.

•In Batch mode, only one graphic is imaged per page.

•After a graphic has been processed as part of the job, if a switch to a JDE with GRAPHICS = NO occurs, the GRAPHICS = NO specification is ignored.

OUTPUT GRAPHICS parameter examples

OUTPUT GRAPHICS=BATCH, RESOLUTION=300;

OUTPUT GRAPHICS=MOVE, RESOLUTION=300, PURGE=NO;

OUTPUT IDFAULT

Specifies the default ink that will be used for objects whose ink is not specified. This parameter remains in effect until another IDFAULT parameter is specified.

Syntax OUTPUT IDFAULT = ‘inkref’’

Using LCDS Print Description Language 4-57