Xerox 701P21091 manual Cme Ink, Option 17. CME INK parameter option and definition, Inkindex

Specifying print format parameters

Default			No default
CME FONT			• A font specification applies to input variable data as well as to
parameter: points				static CME data. If a line number (LINE) and character
to note				position (POSITION) but no insertion text (CONSTANT) are
				specified, the font change that is called out applies to input
				variable data at the specified position.
			• Fonts may be specified at any point. The last font that is
				specified remains in effect until another font is specified. An
				example of a CME with these characteristics is shown below.
	XYZ: CME				LINE = (1,10), POS=40, FONT=2, POS=80,
					FONT=3, LINE = (11,20), POS=1, FONT=3,
					POS=40, FONT=1, POS=80, FONT=2,
					LINE = (31,50), POS=1, FONT=2, POS=40,
					FONT=3, POS=80, FONT=1;
			• Whether a font switch is applied to a CME string constant
				depends upon the order in which FONT and CONSTANT are
				specified in the CME. If FONT is specified before
				CONSTANT, the font switch applies to the string constant. If
				FONT is specified after CONSTANT, the font switch occurs at
				the line position immediately after the string constant.
			CME INK
			Specifies the highlight color ink that will be used to print variable
			data that is affected by the CME or CME constant data.
Syntax [ac:] CME INK = inkindex
Option
		Table 4-17. CME INK parameter option and definition
	Option			Definition
	inkindex			An integer value that represents the ink name that will be used to print
				variable data that is affected by the CME. The value must be from 1 to n,
				where n is the number of inks in the current ink list (defined by the ILIST
				parameter of the IDR command or by the ILIST DJDE).
Default		0

4-14 Using LCDS Print Description Language