Xerox 701P21091 manual Xsml JDL

PDL principles and procedures

The VFU (vertical format unit) commands in the JSL illustration shown in table 1-7 are examples of commands with identifiers. (In this JSL, the VFU command identifiers are called “VFU1” and “VFU9.”)

The types of commands described in the following sections are usually coded first at the system level (following the JDL command) because:

•They require identifiers.

•They typically apply to all jobs within a JSL.

These commands include:

•VFU commands

•TABLE commands

•CRITERIA commands

•PDE commands

•CME commands

•CODE commands

•VOLUME commands

•RECORD commands

•BLOCK commands

NOTE: Make sure that the first command line of the JSL is the JDL identifier command. The system level ID commands then follow. For example:

XSML: JDL;

VFU1: VFU ASSIGN=(1,1), TOF=1, BOF=66;

“XSML” is the name of the complete JDL. The VFU command is at the system level and has the identifier “VFU1.”

1-22 Using LCDS Print Description Language