Xerox 701P21091 manual Image Djde options and definitions, Inkindex Djde

Using Dynamic Job Descriptor Entries (DJDEs)

Table 5-34. IMAGE DJDE options and definitions (Continued)

Option	Definition
hpos	horizontal position.
	Specifies the horizontal position of the left edge of the graphic, as a rightward
	offset, relative to 0,0 on the current physical page.
	Specified as a decimal number with up to three digits to the right of the decimal
	point and may be followed by a space and the units indicator.
	NOTE: The default value for the hpos parameter is 0.
units	Specifies the unit of measure for the vertical and horizontal positions of the
	image on the page. Available units are:
	•	DOTS
	•	CM (centimeters)
	•	IN (inches)
	• UN (user defined unit)
	• XDOTS (DOTS at 600 spi)
	If UN is specified, the user defined positioning unit must be previously defined
	by the OUTPUT UNITS command in the current JDE or JDL.
	The default positioning unit is IN.
H	HOLD
	Specifies that the same graphic is to be held and imaged without further
	callouts, at the same position and with the same scale factor on all subsequent
	pages until changed by a DJDE CANCEL or ALTER.
T	PAGE INTERLEAVED (Type of graphic)
	Specifies that the referenced graphic is page interleaved and follows the
	current page data in the input stream.
n / d	numerator / denominator.
	Specifies the reference scale factor. Each parameter, n and d, must be an
	integer in the range of 1 to 8, thereby allowing a reference scale factor in the
	range of 1/8 to 8.
	The reference scale factor is multiplied by the scale factor specified at the time
	the graphic was digitized and the product is rounded to the nearest integer in
	the range 1 to 8. That integer becomes the effective scale factor with which the
	graphic is imaged.
INKS	Specifies that the ink references that follow will override the inks that were
	defined in the image file.
inkref	ink reference
	Specifies the inks that override the corresponding inks specified in the ink list of
	the image file.

INKINDEX DJDE

Specifies a field within a data record that contains a number that represents the ink index in the current ILIST.

Type Page oriented

Using LCDS Print Description Language 5-45