Xerox 701P21091 manual Palette Djde example, Options 50. Pmode Djde options and definitions

Using Dynamic Job Descriptor Entries (DJDEs)

PALETTE DJDE example

PALETTE = ’SIMPLE’

PMODE DJDE

Specifies the text orientation for each page.

Type Page oriented

Syntax PMODE = {LANDSCAPE PORTRAIT}

Options

Table 5-50. PMODE DJDE options and definitions

Option	Definition
LANDSCAPE	Indicates that print lines will be parallel to the long edge of the
	paper (for paper loaded with its short edge facing the feed
	direction). Print lines on 11 by 17 inch paper are parallel to the
	short edge.
PORTRAIT	Indicates that print lines will be parallel to the short edge of the
	paper (for paper loaded with its long edge facing the feed
	direction). Print lines on 11 by 17 inch paper are parallel to the
	long edge.

PMODE DJDE: point to note

If PMODE is changed through a DJDE, the BEGIN DJDE should be respecified (even if the same horizontal and vertical positions were specified in the previous BEGIN DJDE).

RFORM DJDE

Specifies a form to be printed with all RTEXT pages. It takes effect on the next RTEXT page. The options are the same as for the ROUTE RFORM command.

Type Page oriented

Syntax RFORM = {formid [, (INKS, inkref1 [, inkref2])] NONE}

Using LCDS Print Description Language 5-61