Xerox 701P21091 manual Format Djde options and definitions, Format Djde points to note

Using Dynamic Job Descriptor Entries (DJDEs)

•Because there is ambiguity between the abbreviated forms of the FONTINDEX and the FONTS DJDEs, if either is abbreviated to the first three letters, DJDE processing presumes FONTINDEX.

•If there are more than 128 fonts in a DJDE packet, a syntax error occurs, and the FONTS DJDE is ignored.

•If any font in the font list is missing, a syntax error occurs and the FONTS DJDE is ignored.

FORMAT DJDE

Specifies an entirely new page descriptor entry (PDE) to be used for formatting control. It takes effect on the next page boundary.

Type Page oriented

Syntax FORMAT = PDEid

Options

	Table 5-26. FORMAT DJDE options and definitions
Option	Definition
PDEid	page descriptor entry identifier
	Name of the new PDE being invoked by this DJDE. This PDE is a separate file
	in the “lcds” resources folder on the system disk.
		FORMAT DJDE: points to note

•Parameters of the selected PDE, such as BEGIN, FONTS, and PMODE, may also be modified on an individual basis. (The DJDEs that are specified separately override the parameters that are part of the PDE.

•Format file names must be in all UPPERCASE letters when they are referenced in DJDEs, or the system will not detect them. (However, format file names may have lowercase letters in the JSL commands and parameters.)

Using LCDS Print Description Language 5-37