Xerox 701P21091 Line FCB = Ignore Process, PRINT, Nodisp, Notran, Line Ucsb = Ignore Process

PDL command quick reference

Table B-2. PDL command quick reference table (Continued)

Command	Syntax	Default
LINE	LINE BASELINE = {TOP LARGE[ST] CENTER BOTTOM}	—
	LINE BLANKTYPE = {SPACE NOSPACE}	NOSPACE
	LINE DATA = (pdo, length)	offline: 1,134;
		online: 0,150
	LINE FCB = {IGNORE PROCESS}	PROCESS
	LINE FDATA = (offset, termination)	0, DEFAULT
	LINE FONTINDEX = {offset offset ([,initval][, bitopt]) NONE}	NONE
	LINE GDATA = (offset, termination)	0, DEFAULT
	LINE INKINDEX = {offset offset ([, initval][, bitopt]) NONE}	NONE
	LINE LPI = {(linespacing {LPI DOTS XDOTS}) (linespacing	—
	{LPI DOTS XDOTS}, lineno, (...))}
	LINE MARGIN = {value (value, valuetype)}	1, POS
	LINE OVERPRINT = (overopt, disp)	PRINT, NODISP
	LINE PCC = (offset, transtype)	0,NOTRAN
	LINE PCCTYPE = {PCCname PCCid USER}	offline: ANSI
		online: IBM4245
	LINE UCSB = {IGNORE PROCESS}	PROCESS
	LINE VFU = {VFUid NONE}	NONE
LMODIFY	LMODIFY = TEST	—
MESSAGE	MESSAGE ITEXT = {sc (sc, passnum) NONE WAIT}	NONE
	MESSAGE OTEXT = {sc (sc [, passnum]) [,WAIT] sc [, END] [,	NONE
	WAIT] NONE}

Using LCDS Print Description Language B-5