Xerox 701P21091 manual Terminal window with % prompt displayed

PDL principles and procedures

Figure 1-19. Terminal window with % prompt displayed

2.Move the pointer onto the Terminal window. A blinking cursor should be visible next to the prompt (a % sign, sometimes preceded by the name of your system).

3.At the % prompt, enter the following command to compile the JSL (be sure to leave spaces where they are indicated).

/opt/XRXnps/bin/xjdc options /opt/XRXnps/resources/lcds/JSLNAME.JSL

The options variable may be either omitted or replaced with one or more of the options that are shown on the following table. Options may be specified in any order.

You may shorten the option name to its first three characters (shown in uppercase in the following table).

The first option must be preceded by a hyphen. When you specify multiple options, you must separate them by commas (refer to the following example).

Example:

/opt/XRXnps/bin/xjdc –NOT,LAB,REP /opt/XRXnps/resources/lcds/MYJOB.JSL

1-66 Using LCDS Print Description Language