Xerox 701P21091 manual Specifying various types of character sets, Tcode command parameters

Specifying input parameters

•The printing system accepts lowercase characters expressed literally or symbolically; that is, preceded by the pound sign

(#) functioning as a switch case operator.

The following table gives some examples of how the TCODE command may be coded to specify the following types of character sets.

	Table 2-51. Specifying various types of character sets
Type	Interpretation
1	Defines numeric characters (0 through 9) by default.
2	Defines alphabetic characters (A through Z and a through z) by default.
3	Defines uppercase alphabetic characters (A through Z) by TCODE command.
4	Defines lowercase alphabetic characters (a through z) by TCODE command.
None	Defines characters that are neither numeric nor alphabetic.

• The TCODE command requires a variable of the type ac (at least one character must be alphabetic).

TCODE command parameters

The following table summarizes the use of the TCODE command parameters.

Table 2-52. Summary of TCODE command parameters

Parameter	Specifies	Online	Offline	DJDE
TCODE DEFAULT	Specifies the initial set of character type	Y	Y	N
	assignments that will be used with masked
	comparisons.
TCODE TASSIGN	Associates one or more specified characters	Y	Y	N
	with one or more specified type codes.
TCODE TRESET	Disassociates one or more characters or all	Y	Y	N
	characters in a set from one or more type
	codes.

The following sections describe the syntax of the command parameters and give explanations of the parameter options.

2-50 Using LCDS Print Description Language