Xerox 701P21091 manual Options 31. Line Gdata parameter options and definitions, Line Inkindex

Specifying print format parameters

Options

Table 4-31. LINE GDATA parameter options and definitions

Option	Definition
offset	The starting point of the graphic data.
termination	The terminating byte of the record. The options are:
	• DEFAULT
	– If online, a single terminating byte exists.
	– If offline, no terminating byte exists.
	• n: The number of terminating bytes that exist

Default offset: 0

termination: DEFAULT

LINE INKINDEX

Specifies a field within a data record that contains a number that represents the ink index in the current ILIST.

Syntax LINE INKINDEX = {offset (offset [, initval [, bitopt]]) NONE}

Options

Table 4-32. LINE INKINDEX parameter options and definitions

Option	Definition
offset	Indicates the byte offset in the data record where the ink index number is
	located.
initval	initial value.
	Specifies an index value that is associated with the first ink in the ink list. Must
	be ONE or ZERO.
	• “ZERO” specifies that the first ink on the ink list is considered “ink 0.”
	• “ONE” indicates that the first ink on the ink list is considered “ink 1.”
	The default initval is ONE.
bitopt	bit option
	Specifies the number of bits that should be used in calculating the ink index.
	The range is 1 through 7.
	The default bitopt value is 4.
NONE	Specifies that there is no ink index.

Default NONE

Using LCDS Print Description Language 4-29