Xerox 701P21091 manual Options 55. Output Forms parameter options and definitions

Specifying print format parameters

OUTPUT FORMS

Specifies forms to be associated with the report copies. Different forms may be associated with different copies of a report by the use of multiple FORMS left parts in the same OUTPUT command.

Syntax OUTPUT FORMS = {NONE formid (formid [, init [, copies]]) [, (INKS, inkref1 [,inkref2] ...)])}

NOTE: To ensure readability, enter the entire FORMS parameter. Do not abbreviate to “FOR,” because the system interprets “FOR” as FORMAT.

Options

Table 4-55. OUTPUT FORMS parameter options and definitions

Option	Definition
formid	Specifies a 1 to 6 character form file name (may be numeric, alpha, or
	alphanumeric) that already exists on the system disk.
	Forms can be coded at a workstation with forms creation software such as
	Elixir, or on another LPS using Xerox Forms Description Language (FDL), and
	transferred to the controller disk by importing it via diskette, tape, or CD. (Refer
	to “Importing LCDS resources” in the “PDL principles and procedures” chapter,
	for the procedure.)
init	Specifies the first copy number to which the specified form applies. This
	defaults to the first or next copy.
	If neither init nor copies is specified, the form applies to all copies of all data
	pages of the report.
copies	Specifies the number of copies to which the form applies.
	If the copies option is not specified, the last (or only) specified form applies to
	all copies beginning with the init copy number.
	If the form is not the last one specified, copies defaults to 1.
NONE	Means that no form is added to the associated report page of variable data.
inkref	Ink reference.
	Identifies the inks that override the corresponding inks that are specified in the
	ink list of the form. If a form does not contain an ink list, the form is printed in
	black.
Default	No default

Using LCDS Print Description Language 4-55