Xerox 701P21091 Options 69. Output Purge parameter options and definitions, Output SF1FUNCTION

Specifying print format parameters

Options

Table 4-69. OUTPUT PURGE parameter options and definitions

	Option		Definition
	NO		Specifies that graphic disk files should not be deleted.
	YES		Specifies that all .IMG graphics files that were created or replaced by
			document interleaved graphic processing for this report should be deleted
			at the end of the report printing.
Default		YES
OUTPUT PURGE		You can use the SAVE DJDE to override the purging of specific
parameter: point		files.
to note
		OUTPUT SF1FUNCTION
		Specifies to the third party finisher whether or not it should
		perform the user-defined SF1 operation on the current report.
		This parameter provides control over third party finishing devices
		that conform to the DFA standard. You use it to invoke Finishing
		Function SF1 through the DFA channel C6. The user must
		specify what function SF1 will have. (Refer to your finishing
		equipment vendor documentation for information on what
		function should be specified for your finisher.)
Syntax		OUTPUT SF1FUNCTION = {NO YES}

Options

Table 4-70. OUTPUT SF1FUNCTION parameter options and definitions

Option	Definition
YES	Instructs the finisher to initiate the user-defined SF1 finishing function on the
	current sheet.
NO	Specifies that Finishing Function SF1 will not be implemented on the current
	sheet.

Default NO

Using LCDS Print Description Language 4-75