Xerox 701P21091 manual Output command parameters and functions for graphics

6.Using PDL commands for graphics

Several PDL parameters are available for graphics handling. These include four OUTPUT command parameters (specified in the JDE) and six DJDEs. The following tables summarize those parameters.

Table 6-1. OUTPUT command parameters and functions for graphics

Option	Definition
OUTPUT GRAPHICS	Specifies if and how graphics will be processed in current job.
OUTPUT IMAGE	Specifies initial scaling and positioning parameters for graphics in Batch
	mode.
OUTPUT PURGE	Specifies default disposition of document interleaved graphics at the end
	of a report.
OUTPUT UNITS	Specifies units of measure for positioning graphics.

	For a explanation of the OUTPUT command parameters, refer to
	the OUTPUT command description, in the “Specifying print
	format parameters” chapter.
	Table 6-2. DJDE definitions for graphics
Option	Definition
ALTER DJDE	Specifies new imaging parameters for graphics previously referenced using
	HOLD statement.
BATCH DJDE	Marks beginning and end of online Batch mode graphic data.
CANCEL DJDE	Terminates option of the GRAPHIC DJDE.
GRAPHIC DJDE	Precedes interleaved graphic in data stream.
IMAGE DJDE	Specifies name, scaling, and positioning of a graphic printed.
SAVE DJDE	Identifies document interleaved graphics not to be deleted or purged.

Using LCDS Print Description Language 6-1