Xerox 701P21091 manual Options 58. Side Djde options and definitions, Side Djde points to note

Using Dynamic Job Descriptor Entries (DJDEs)

Options
	Table 5-58. SIDE DJDE options and definitions
Option		Definition
sideopt		side option.
		In duplex (with no BFORM): The four sideopt options produce the
		following results:
	NUFRONT	The specified logical page is positioned as the first logical page on a new
		sheet.
	BACK	The specified logical page is positioned as the first logical page of the next
		available back.
	NUBACK	The specified logical page is positioned as the first logical page on the
		back of a new sheet.
	NEXT	The specified logical page is positioned as the first logical page on the
		next available side: the back of the current sheet or the front of the next
		sheet.
		The logical page is moved unless it is already properly positioned as the
		first logical page on the specified side.

In simplex, or in duplex with BFORM: The sideopt parameter is forced to NUFRONT, and the specified page is positioned as the first logical page.

If the logical page is already properly positioned, a blank sheet is not created.

offsetopt		Specifies whether sheets containing repositioned logical pages will be
		offset in the stacker.
		The available offsetopt parameters are:
		• OFFSET Causes the sheet on which the repositioned logical page
		occurs to be offset.
		• NOFFSET No offset occurs.
		The default offset option is NOFFSET.
	SIDE DJDE: points to note
	• The SIDE DJDE takes effect at a logical page boundary.
	• The SIDE DJDE options are the same as for the RPAGE
		command, SIDE parameter.
	• The SIDE DJDE should be used instead of, not in
		conjunction with, the RPAGE command. It overrides both
		the RPAGE SIDE and ROFFSET parameters, if they apply to
		the next logical page. Thus, it triggers repositioning of only a
		single logical page and does not otherwise override the
		RPAGE SIDE or ROFFSET parameters on subsequent
		pages.

Using LCDS Print Description Language 5-69