Parameter, Line LPI, Xdots 600 dpi | Xerox 701P21091 manual

Specifying print format parameters

LINE INKINDEX	• The DP EPS support only the offset option for the LINE
parameter: points	INKINDEX parameter.
to note	• When the bitopt option is specified, the initval must also be

	specified.
	• The printer permits an entire line or a portion of a line to be
	printed in highlight color. You can specify highlight color for
	variable data on a form. (This is analogous to the output
	capability of font switching.)
	Variable data is printed using the ink that is specified in the
	INKINDEX byte. If the INKINDEX byte is blank or does not
	exist in the variable data record, the variable data is printed
	using the default ink.
LINE INKINDEX
parameter	LINE	DATA=(1,132), FONTINDEX=133,
example	LINE	DATA=(1,132), FONTINDEX=133,
example		INKINDEX=143;
		INKINDEX=143;

LINE LPI

Specifies the line spacing values for each line.

Syntax LINE LPI = {(linespacing {LPI DOTS XDOTS}) (linespacing {LPI DOTS XDOTS}, lineno, (...))}

Options

Table 4-33. LINE LPI parameter options and definitions

Option	Definition


linespacing	Specifies the line spacing value. May be measured in:
	• LPI (lines per inch)
	•	DOTS
	•	XDOTS (600 dpi)
	The default unit is LPI.

lineno	line number
	Specifies the line number or numbers over which the line spacing will be
	applied. The options are:
	•	n	Number of the line to which the specified linespacing will be
			applied
	•	n– Number of the line from which the specified linespacing will be
			applied through BOF (bottom of form).
	•	n–mThe specified linespacing will be applied from line n through
			line m.

4-30	Using LCDS Print Description Language

Page 270

Image 270

Xerox 701P21091 Parameter, Options 33. Line LPI parameter options and definitions, Xdots 600 dpi, Default unit is LPI

Contents

Xerox DocuPrint EPS 701P21091 Version 3.7 MayPage Table of contents Specifying input parameters Page Page Using logical processing Page Specifying print format parameters Page Using Dynamic Job Descriptor Entries DJDEs Page Format Djde Using PDL commands for graphics Using Lcds Print Description Language Table of contents Xvi Using Lcds Print Description Language Laser safety Ozone information U. S. only Operation safety U. S Operation safety Europe Electrical supply Operator accessible areas Ventilation Maintenance Before cleaning your productCE mark Europe only For further information Contents Introduction Conventions Related publications DocuPrint 100/115/135/155/180 EPS documentationDP 100/115/135/155/180 EPS documents DocuPrint 75/90 EPS documentation DP 75/90 EPS and 75 MX documents Using Lcds Print Description Language Xxvii Introduction Xxviii Using Lcds Print Description Language PDL principles and procedures Enabling PDL features and functions PDL command structure and components Command linesComponents of a command Set of typical PDL commands VFU1 ASSIGN= TOF= BOF= CME4 LINE= POSITION= FONT= VFU1 VFU Components constants Keywords Value constants Variable referencesExample String constants Using the # character case toggle Using a repeat countTypes of string constants Constant Definition Example Ascii Specified, Ebcdic is the default Ebcdic Constant Definition H2 and H6Repeat count examples Incorrect structure for DP EPS Command syntaxSyntax rules Valid structure for DP EPS Criteria CONSTANT=0,120,EQ,T1 Syntax conventions Command syntax conventionsSymbol Term Function Output Sample PDL commands PDL command categories Job Source Library JSL JSL command levels What does a JSL specify? Other commands in the JSL can reference them. Commands with Command levels and their general purposeCommand level General purpose Jobs and catalogs within the JSL Sample JSL file format JDL or system level commands Coding system level commands with identifiersJDL name Xsml JDL VFU2 Coding other system level commands Tables Specifying Acct command parameters Offline Catalog level commands Job or JDE level commands Coding job or JDE level commands Examples Ending a JSL What may follow the END command Comments Sample completed JSL Before creating a JSL considerations and decisions Output specifications Input data Special features Interactions between JSLs, catalogs, and jobs Paper sizes and page frames Orientation Vertical and horizontal positions in portrait mode Layout for FMT6 Impact printer format, 8.1 lines per inch Page Fixed pitch and proportional font character Spacing Overriding PDL commands Command override sequence Print Services window with Queue Manager Selected Page PDL principles and procedures Example Sample JSL Hints and tips Smplst JDL VFU Coding a JSL Before you start Short JSL coding procedure Workspace and Programs menus 10. Text Editor window 11. Text Editor Include a File window 12. Save As window Recommended Full JSL coding procedure 13. Workspace and Programs menus 14. Text Editor window Recommended JDE INCLUDE=CATPOW 16. Text Editor Save As window Sample online JSL 10. Sample online JSL CONSTANT=// JOB Sample offline JSL 11. Sample offline JSL LTHFLD=2, FORMAT=BIN, OFFSET=0 Compiling procedure Compiling a JSL 18. Selecting Tools from the Workspace menu 19. Terminal window with % prompt displayed 12. xjdc command options Option Definition= / foldername1 / foldername2 Files produced by the compilation procedure Correcting errors in a JSL 21. Text Editor Open a File window 22. a .LST file for a JSL containing errors Benefits of using DJDEs Dynamic job descriptor entries DJDEs Online dump Online dump format and contentDumps Starting and ending online dump sessions 13. Print format command usage for online dump Restrictions for online dumpsField Definition Offline dump format and content Offline dumpStarting and ending tape dump sessions Page 14. Software version compatibility 15. Highlight color commands Command Color parameter Available?Printing highlight color applications on DP EPS Logo CommandColor parameter Available? Number Points to note for colored forms Other Xerox monochrome LPS jobs Specifying input parameters Input data streams Input processing functions Input processing onlinePage Downloading resource files from the host to the printer Default channel assignments made at installation Channel Line Example of an online JSL Online JDL VFU1 CONSTANT=’EOJ’ Input processing offline Host computer tape formats Tape codes Packed data formatsRecord formats Multivolume processing Record structure Input processing command descriptions Summary of PDL commands associated with input ProcessingCommand Function Summary of Block command parameters Block commandBlock command parameters Parameter Specifies Offline Online Block Adjust DefaultBlock Constant Block Format Block Length Block Lthfld Block LmultOptions Block Lmult parameter options and definitions Options 10. Block Lthfld parameter options and definitions Syntax Point to noteBlock Offset Options 11. Block Offset parameter options and definitions Block Preamble Default noBlock Postamble parameter points to note Block Zero Block command points to note Block command example Code command parameters 15. Summary of Code command parametersParameter Specifies Online Offline Code Default Code AssignOptions 16. Code Assign parameter options and definitions To note Options 17. Code Default parameter options and definitionsParameter points Parameter Code Spacecode Default Code Spacecode parameter point to noteDbcode command Spacecode Dbcode Assign Dbcode command parameters19. Summary of Dbcode command parameters Options 20. Dbcode Assign parameter options and definitions Dbcode Default Dbcode command point to noteIden command Default Default Iden DjpccOptions 23. Iden Djpcc options and definitions Iden Oprinfo Iden OffsetOptions 24. Iden Offset parameter option and definition Options 25. Iden Oprinfo options and definitions Options 27. Iden Skip parameter options and definitions Iden PrefixOptions 26. Iden Prefix parameter options and definitions String constant Kcode command parameters Iden command exampleKcode command 28. Summary of Kcode command parameters Kcode Assign Kcode DefaultOptions 30. Kcode Default parameter options and definitions Options 29. Kcode Assign parameter options and definitions PCC command parameters Kcode command point to notePCC command 31. Summary of PCC command parameters PCC Advtape Options 32. PCC Advtape parameter options and definitionsPCC Assign Space print parameters Syntax for ccln definitionOptions 33. PCC Assign parameter options and definitions Bottom Of Form actions optional PCC Default Options 34. PCC Default parameter options and definitionsPCC Assign parameter points to note Default TOF PCC InitialOptions 35. PCC Initial parameter options and definitions PCC Mask Default X’FF’ PCC command points to notePCC command example Options 36. PCC Mask parameter options and definitions 37. Summary of Record command parameters Record commandRecord command parameters Record Adjust Options 38. Record Adjust parameter options and definitions Record ConstantFrom 1 to 4 bytes Options DefinitionsOptions 41. Record Length parameter options Definitions Record Lthfld Record LmultOptions 42. Record Lmult parameter options and definitions Options 43. Record Lthfld parameter options and definitions Record Postamble Record OffsetOptions 44. Record Offset parameter options and definitions Record Preamble LTHFLD, OFFSET, FORMAT, and Preamble parameters Default Record command Points to noteRecord Structure Constant and Structure parameters Using online JDEs in offline JDLs Record command exampleLine Data parameter and Record Length parameter Record format types Seffnt command Seffnt Sefmap Seffnt command parameters48. Summary of Seffnt command parameters Options 49. Seffnt Sefmap parameter options and definitions Seffnt MAP REP Replace Seffnt command points to note Options 50. Seffnt MAP parameter options and definitions Seffnt command examples Tcode command General rules for using the Tcode command 51. Specifying various types of character sets Tcode command parameters52. Summary of Tcode command parameters Type Interpretation Default Tcode Default parameter points to note Tcode DefaultOptions 53. Tcode Default parameter options and definitions Tcode Tassign Tcode Treset Options 54. Tcode Tassign parameter options and definitions Options 55. Tcode Treset parameter options and definitions Tcode command examplesResets all types for all characters Volume command Volume command parameters56. Summary of Volume command parameters Volume Label Volume KanjiVolume Kcode Volume Lcode Volume Code Volume BmultOptions 57. Volume Bmult parameter options and definitions Options 58. Volume Code parameter options and definitions Default Volume Code parameter points to note Volume DbcodeOptions 59. Volume Dbcode parameter options and definitions Options 61. Volume Emtype parameter options and definitions Options 60. Volume Dbcs parameter options and definitionsVolume Emtype Volume EOV Options 62. Volume EOV parameter options and definitions Volume Expage Volume Host Options 63. Volume Expage parameter options and definitionsDefault YES Options 64. Volume Host parameter options Definitions Default Volume Host parameter points to note Double-byte printing Volume Kanji Options 65. Volume Kanji parameter options and definitions Options 67. Volume Label parameter options and definitions Volume KcodeOptions 66. Volume Kcode parameter options and definitions SPR Honeywell 2000 System Print Tape Default Ebcdic Volume LcodeOptions 68. Volume Lcode parameter options and definitions Volume Lpack Volume Minlab Options 69. Volume Lpack parameter options and definitionsVolume Maxlab 70. Maxlab parameter options and definitions Volume Options 71. Volume Minlab parameter options and definitionsVolume Optimize Optimize Volume Oshdp Volume OschnOptions 73. Volume Oschn parameter options and definitions Options 74. Volume Oshdp parameter options Definitions Options 76. Volume Rmult parameter options and definitions Options 75. Volume Ostlp parameter options DefinitionsVolume Rmult Volume Tcode Options 78. Volume Unpack parameter options and definitions Options 77. Volume Tcode parameter options and definitionsVolume Unpack Default None 80. Character Type code options Volume VcodeOptions 79. Volume Vcode parameter options and definitions Type Thousands separator Decimal point Online Volume command examples81. Unique character code types Type Characters Offline Using logical processing Types of commands for logical processing Test expressions Coding a test expression Command-keyword TabidCriid Commands that define criteria and constants Logical processing commands that have Test parametersTable command Table Constant Table command parametersSummary of Table command parameters Options Table Constant parameter options and definitions Table Mask Options Table Mask parameter options and definitions Table command points to note Table command examples Mask associations of character to type for the Table Command Character Type Meaning Criteria command Criteria command modesCharacter to type associations Using the Criteria command String comparisons Using logical processing Masked comparisons using nondefault type assignments Commands that specify string comparisons Criteria command parameters Summary of Criteria command parametersCriteria Change Options Criteria Change parameter options and definitions Not done and the test fails Criteria Change parameter syntax example SyntaxCriteria Constant Options Criteria Constant parameter options and definitions Constant parameter syntax example SyntaxCriteria Linenum Criteria Value Initial lineCount Tabid Table identifier Page Parameter syntax Example Logical processing command descriptions Banner commandCommand Specifies Banner command parameters 13. Summary of Banner command parametersBanner Hcount Options 15. Banner Hjobno parameter options and definitions Options 14. Banner Hcount parameter options and definitionsBanner Hjobno Banner Hrptna Option 17. Banner Tcount parameter option and definition Options 16. Banner Hrptna parameter options and definitionsBanner Tcount Banner Test Options 19. Banner Type parameter options and definitions Default BannerOptions 18. Banner Test parameter options and definitions Data Condition Parameter Result Banner command points to noteBanner command examples Tcount = Bselect and Bdelete commands Bselect and Bdelete Test parameter Bselect and Bdelete commands points to note 21. Test parameter options and definitions Sample Bselect and Bdelete command Usage Example 22. Summary of Lmodify command parameters Lmodify commandLmodify command parameters Lmodify INK Options 25. Lmodify Test parameter options and definitions Lmodify SelectLmodify Test Line Points to note Lmodify command Raux command Raux Test parameter Raux command points to noteRaux command example Options 26. Raux Test parameter options and definitions Rdelete and Rselect commands Rselect and Rdelete Test parameter Rdelete and Rselect commands point to note Rdelete command example Rfeed command Rfeed Test parameter Testexp Rfeed command points to noteOptions 28. Rfeed Test parameter options and definitions Stock Roffset command Default ALL Roffset command parameters29. Summary of Roffset command parameters Roffset Passes Roffset command points to note Roffset TestOptions 31. Roffset Test parameter options and definitions Roffset command example Diagram of a sample Roffset command 32. Summary of Rpage command parameters Rpage commandRpage command parameters Rpage Side Options 33. Rpage Side parameter options and definitions Rpage Test Options 35. Rpage When parameter options and definitionsDefault TOP Options 34. Rpage Test parameter options and definitions Rpage command points to note Rpage command examples Effects of Rpage Side parameter Effects of Rpage When parameter 36. Summary of Rsuspend and Rresume command parameters Rresume and Rsuspend commandsRsuspend and Rresume command parameters Rsuspend and Rresume Begin Current Rresume and Rsuspend commands points to noteRsuspend and Rresume Test Next Interaction with Rstack Rsuspend and Rresume example Records that will not be printed Data that will be printed Rstack command Rstack delimiter modes Delimiter on accounting Status display Rstack command parameters 39. Summary of Rstack command parametersRstack Acctinfo Rstack Delimiter Rstack Hrptna Rstack Print Default Rstack Print parameter points to noteOptions 42. Rstack Hrptna parameter options and definitions Options 43. Rstack Print parameter options and definitions Rstack Test Either Change mode or Constant mode criteriaDefault No default Rstack command points to note Points to note for online printing Rstack command example Following is an example of the Rstack command Sample Rstack command usage illustration Print format command descriptions Summary of print format commands Summary of Abnormal command parameters Abnormal commandAbnormal command parameters Abnormal Acctfeed Abnormal Error Abnormal Code Continue Options Abnormal Error parameter options and definitionsAbnormal Abort Default Stop Abnormal Imismatch Options Abnormal Isubstitute parameter options Definitions Default ANYAbnormal Isubstitute Abnormal Otext Abnormal REP Default Abnormal Otext parameter exampleOptions Abnormal Otext parameter options and definitions Options Abnormal REP parameter options and definitions Abnormal Security SecurityJDL 11. Summary of Acct command parameter Acct commandAcct command parameters Acct Dept Acct User Default BIN Acct command points to noteAcct command example Options 13. Acct User parameter options and definitions CME command CME command parameters 14. Summary of the CME command parameters CME Font CME ConstantOptions 15. CME Constant parameter options and definitions Option 16. CME Font parameter option and definition CME INK Option 17. CME INK parameter option and definitionInkindex CME Line Options 18. CME Line parameter options and definitions Default CME command points to note CME PositionOptions 19. CME Position parameter option and definition Position Copy sensitive CMEs CME command examples IDR command IDR Icatalog IDR command parameters20. Summary of IDR command parameters Options 21. IDR Icatalog parameter options and definitions Options 22. IDR Ilist parameter options and definitions Default IDR Ilist parameter points to noteIDR Ilist ’inkname ’ 24. Summary of Line command parameters Line commandLine command parameters IDR Palette Line Baseline Default Nospace Options 25. Line Baseline parameter options and definitionsLine Blanktype Options 27. Line Data parameter options and definitions Default ProcessLine Data Line FCB Default offset Line FdataOptions 29. Line Fdata parameter options and definitions Line Fontindex Specifies that there is no font index Line Fontindex parameter points to note Line Gdata Options 32. Line Inkindex parameter options and definitions Options 31. Line Gdata parameter options and definitionsLine Inkindex Specifies that there is no ink index Line LPI Default unit is LPIParameter Options 33. Line LPI parameter options and definitions 34. Line Margin parameter options and definitions Default Line LPI parameter points to note Syntax OptionsLine Margin Parameter point Default Line Overprint parameter points to note Lines is always printed on the accounting Line PCC Options 36. Line PCC parameter options and definitions Line Pcctype Options 37. Line Pcctype parameter options and definitions Line VFU 38. Line VFU parameter options and definitionsControl of Print and Space Line command points to note Line command examples Diagram of a sample print data offset pdo Parameter Message command Sample data record structure Message Itext Message command parameters39. Summary of Message command parameters Options 40. Message Itext parameter options and definitions Message Otext Options 41. Message Otext parameter options and definitionsEND Message command points to note Message command example Output command Output command parameters42. Summary of Output command parameters Output IDR Output IdfaultOutput Graphics Output Image Output Bform 43. Bform parameter options and definitionsData Output Binding Default Long43. Bform parameter options and definitions Long Specifying print format parameters Specifying print format parameters Output Collate Output CopiesOptions 46. Output Copies parameter options and definitions Output Cover Options 47. Output Cover parameter options and definitionsOutput Cycleforms Formid CycleformsParameter Example Inkref FIX Output DensityOutput Destination Nofix Options 51. Output Duplex parameter options and definitions Default BINOutput Duplex Parameter point To note Options 53. Output Feed parameter options and definitions Options 52. Output Faceup parameter options DefinitionsOutput Feed ‘stockname’ Default FMT1 Output FormatOptions 54. Output Format parameter options and definitions Output Forms Options 55. Output Forms parameter options and definitions Cycleforms and Forms parameters Both may be Output GraphicsBatch Output Graphics parameter examples Default Output Graphics parameter points to noteOutput Idfault Move Output IDR Options 58. Output IDR parameter options and definitions‘inkref ’’ Ink reference Output Image Options 59. Output Image parameter options and definitions Output Invert Options 60. Output Invert parameter options Definitions Output Iresult Default Output Iresult parameter points to note60. Output Invert parameter options Definitions Black Xdots 600 dpi dots Output Logo62. Output Logo parameter options and definitions Logo Output Modify Options 63. Output Modify parameter options and definitionsSpecifies that data are processed without modification Output NTO1 Options 64. Output NTO1 parameter options and definitions Default no Output Number Options 65. Output Number parameter options and definitions Output Offset = ALL First None Number character string is placed on the page atOutput Offset Options 66. Output Offset parameter options Definitions Where ostkspec is Output Ostk67. Output Ostk parameter options and definitions Defaults Output Ostk parameter points to note When using tabs and ordered stock67. Output Ostk parameter options and definitions Page FEED=tab stock Page Output Papersize Default Output Papersize parameter points to noteWhat to do Uslegal Output Papersize parameter example Output Purge Options 69. Output Purge parameter options and definitions Output SF1FUNCTION Output SF2FUNCTION Output Shift Options 72. Output Shift parameter options and definitions Semiauto Default Output Sizing parameter points to noteOptions 73. Output Sizing parameter options and definitions Best Output Staple Options 74. Output Staple parameter options and definitions Output Stocks Options 75. Output Stocks parameter options and definitionsStocksetname Output Sysppr Options 76. Output Sysppr parameter options Definitions Sysppr and the Stockset Syspage parameter Output Tmode Default Output Tmode parameter points to noteInches is the default widthunit Options 77. Output Tmode parameter options and definitions Pitch modes and throughput performance The printing Pitch Dots Xdots PPMPage Page Output Trans DP 100/115/135/155/180 EPS only Transparencies cannotOutput Units Options 81. Output Xshift parameter options and definitions Options 80. Output Units parameter options and definitionsOutput Xshift Size Output command point to note Output command examples Illustration of ways to use Output Offset Parameter Example Standard PDEs Default 82. Standard print formats PDEsLines Char No. Per Approx Size PDE command parameters 83. Summary of PDE command parametersPDE Begin Options 84. PDE Begin parameter options and definitions PDE Begin Bform Copies Duplex JDE JDL Otext Rtext PDE Fonts Options 85. PDE Fonts parameter options and definitions PDE Pmode Options 86. PDE Pmode parameter options and definitionsLandscape PDE command points to note PDE command examples 87. Summary of Route command parameters Route commandRoute command parameters Route Rform Route Rtext Route RformOptions 88. Route Rform parameter options and definitions Formid Form identifier Command. Refer to the fontindex option in this table Options 89. Route Rtext parameter options and definitionsSpecifies that the text applies to all copies 102 Using Lcds Print Description Language Route command example Stockset command Stockset command parameters 90. Summary of Stockset command parametersStockset Assign Stockset Inifeed Stockset Syspage Syspage StocksetPaper size mismatch on system pages Pages generated Example of mismatch handling Stockset command example Bills Stockset Assign = F1302, Cover 94. Summary of VFU command parameters VFU commandVFU command parameters VFU Assign Options 95. VFU Assign parameter options and definitions 96. VFU BOF parameter options and definitionsVFU TOF To note to VFU command points to note 97. VFU TOF parameter options and definitions VFU command example Page Using Dynamic Job Descriptor Entries DJDEs Using the Iden command to enable DJDEs Specifying Djde records Application of DJDEs Single record Djde diagram and Iden command Messages on Missing END command or page boundary. The followingDjde operator information pages Oprinfo pages Parameters that cannot be changed through a Command ParametersRestrictions on job parameter modification JDE Djde Abnormal Acct Parameters that can be changed through a JDE DjdeParameters that are changeable by a JDE Djde Rdelete Record Length Rfeed Roffset Considerations and cautions for using DJDEs Solution JDE JDL DUPLEX=NO Feed Types of DJDEs Carriage control parameter Processing with Djde Oriented DJDEs Accounting log. You can print out the values MAP ItextJDE Margin File Record oriented DJDEsAssign LPI Djde descriptions Record oriented DJDEs for graphicsAlter Djde Examples of Alter Djde Options Alter Djde options and definitionsAlter Djde point to note UN user defined units Assign Djde points to note Assign DjdeAssign Djde options and definitions Batch Djde Begin Djde Options Batch Djde options and definitionsBatch Djde points to note Start 10. Begin Djde options and definitions Begin Djde points to noteBform Djde Init Initial copy Options 11. Bform Djde options and definitionsBform Djde points to note References BOF Djde 12. BOF Djde options and definitions Options 13. C text Djde options and definitions Cancel DjdeOptions 14. Cancel Djde options and definitions Text Djde points to note Collate Djde point to note Collate DjdeOptions 15. Collate Djde options and definitions Copies Djde 17. Data Djde options and definitions Copies Djde points to noteData Djde Data Djde point to note 18. Dept Djde options and definitions Dept DjdeSyntax Dept = sc Options Dept Djde points to note Duplex Djde Options 19. Destination Djde options and definitionsDestination Djde points to note Options 20. Duplex Djde options and definitions EOF Djde END DjdeSyntax END END Djde points to note Syntax EOF EOF Djde point to note Feed Djde Options 21. Feed Djde options and definitionsFdata Djde 22. Gdata Djde options and definitions File Djde23. File Djde options and definitions 23. File Djde options and definitions File Djde points to noteFile Djde processing Card image file processing LPS labeled file processing Page Fontindex Djde 24. Fontindex Djde options and definitions Fontindex Djde points to note Fonts Djde 25. Fonts Djde options and definitions 25. Fonts Djde options and definitions Fonts Djde points to note Format Djde 26. Format Djde options and definitionsFormat Djde points to note Forms Djde 27. Forms Djde options and definitionsForms Djde point to note Gdata Djde 28. Gdata Djde options and definitionsGraphic Djde 29. Graphic Djde options and definitions Graphic Djde points to note Options 30. Icatalog Djde options and definitions Idfault DjdeIcatalog Djde Icatalog Djde example IDR Djde 32. IDR Djde options and definitionsIlist Djde Image Djde Options 33. Ilist Djde options and definitionsIlist Djde example 34. Image Djde options and definitions 34. Image Djde options and definitions Inkindex Djde 35. Inkindex Djde options and definitions Invert Djde Options 37. Iresult Djde options and definitions Options 36. Invert Djde options and definitionsIresult Djde Iresult Djde points to note Itext Djde points to note Itext DjdeOptions 38. Itext Djde options and definitions Syntax JDE = JDEid 39. JDE Djde options and definitions JDE Djde points to noteJDL Djde JDL Djde points to note Logo Djde41. Logo Djde options and definitions 41. Logo Djde options and definitions Logo Djde points to note LPI Djde42. LPI Djde options and definitions MAP Djde 42. LPI Djde options and definitionsLPI Djde point to note Options 43. MAP Djde options and definitions Modify Djde 44. Margin Djde options and definitionsMargin Djde points to note 45. Modify Djde options and definitions 45. Modify Djde options and definitions Modify Djde points to noteNumber Djde 46. Number Djde options and definitions Number Djde point to note Using Dynamic Job Descriptor Entries DJDEs Type Number Djde exampleOtext Djde Options 47. Otext Djde options and definitions 48. Overprint Djde options and definitions Otext Djde point to noteOverprint Djde Overprint lines is always printed on the accounting Options 49. Palette Djde options and definitions Overprint Djde points to notePalette Djde OptionDefinition Options 50. Pmode Djde options and definitions Palette Djde examplePmode Djde Pmode Djde point to note Rtext Djde 51. Rform Djde options and definitionsRform Djde points to note Specifies that no form will be printed with Rtext pages 52. Rtext Djde options and definitions Rtext Djde exampleSpecifies that no text is to be printed on a separate Save Djde point to note Save Djde53. Save Djde options and definitions Sefmap Djde Sefmap Djde examples Options 54. Sefmap Djde options and definitionsSefmap Djde points to note Font1, font2 SF1FUNCTION Djde Options 55. SF1FUNCTION Djde options and definitions SF2FUNCTION Djde Options 56. SF2FUNCTION Djde options and definitionsShift Djde 57. Shift Djde options and definitions Shift Djde points to noteSide Djde Options 58. Side Djde options and definitions Side Djde points to noteOffsetopt Stocks Djde point to note Stocks DjdeOptions 59. Stocks Djde options Definitions Tmode Djde Syntax TOF = value Options 60. Tmode Djde options and definitionsTOF Djde 61. TOF Djde options and definitions Trans Djde Options 62. Trans Djde options and definitionsTrans Djde points to note Xshift Djde XMP DjdeOptions 63. XMP Djde options and definitions Report 64. Xshift Djde options and definitions Output command parameters and functions for graphics Djde definitions for graphics Input for graphics Error handling for graphics Graphic processing modes Formats for graphic data Page Graphics features restrictions Random Move modeImpact of graphics on system performance Page Page Table A-1. Symbols used in command syntax Contents of command table columns Summary table of PDL commands and DJDEs Table A-2. PDL commands and DJDEs Name ‘inkref’’ DP EPS Dbcode Assign Default END Djde Cancel Djde ALLDefault Ebcdic Position Filename ‘inkref’ 4850, 4890, DP92C LPS, DP EPS prints Black System default 4850, 4890, DP92C LPS, DP EPS prints BlackAcIDR Jdename All VFU None Density DefaultUcsb Process LPS, DP EPS Message Itext None Mod & pos =1 Width unit=IN Stockdef First ‘stockname’ Noeof Expage YES DP EPS Host Ibmos Code EbcdicDbcode DP EPS Dbcs Emtype EOV Nopause Kanji DP EPS Kcode Label Standard PDL command quick reference Table B-1. Symbols used in command syntax Command Syntax Default PDL command Quick Reference tableTable B-2. PDL command quick reference table Acct User = BIN Tray Both None Alter Djde Block Zero = YES no Bselect Iden Offset = value OnlyFile = filename , filetype , f , s , n Only JDE = JDEname Only Notran Line FCB = Ignore ProcessPRINT, Nodisp Line Ucsb = Ignore Process Inkref1 , inkref2 Output Feed = stockreference ‘stockname’ Main AUXInkindex1 , inkindex2 Output Offset = ALL First None Output Purge = YES no Output Resolution = 300Output XMP = Default Report Output Papersize = A3 A4 B4 B5 Uslegal L0112B Rfeed Test = testexp, stockdef No default for StockdefAcPDE AcPDE Begin = vpos, hpos 18 IN, .66 Raux Test = testexp Rstack Print = BIN Both Tray None AcTABLE Mask = ignore chart ,charspeci1 , charspeci2Rstack Delimiter = YES no Rsuspend Rsuspend Begin = Current Next Volume Tcode = tcodetype tcodename Volume Vcode = translation type, keyword Character code assignments Table C-1. IBM BCD code set IBM BCD code setHoneywell/Bull 200 and 2000 BCD code set Table C-2. Honeywell/Bull 200 and 2000 BCD code set Table C-3. Honeywell/Bull 6000 BCD code set Honeywell/Bull 6000 BCD code setFieldata translation Table C-4. Fieldata translation Univac Ascii character set Table C-5. Univac Ascii character setOctal Character Most significant bits Standard Ascii character setTable C-6. Standard Ascii character set Nary Standard Ebcdic character set Table C-7. Standard Ebcdic character set Ebcdic most significant digit Page Input unpacking examples Figure D-1. Input unpacking examples Label specifications Host type Unlabeled Valid host computer and label specificationsTable D-1. Valid host computer and label specifications Standard System print Table D-2. JDL source files on software CD Label specificationsHost system JDLs on system software CD Host type Unlabeled LPS tape label format IbmrcaOnline Figure D-2. LPS tape format diagram RAD-50 Table D-3. Content of tape recordsTable D-4. RAD-50 character set RAD-50 Character Octal value Decimal value Glossary Page Ascii Page Page Page Program IPD IOMIOT IpfontsPage Page Page Page Page Page Page Page Symbols Numerics INDEX-2 Copies Djde Default ParameterDestination Djde Duplex Djde FCB IBM JSL INDEX-7 PCC PPI SEF Sefmap Djde INDEX-10 INDEX-11 Index INDEX-12

Xerox 701P21091 manual Parameter, Options 33. Line LPI parameter options and definitions

Models: 701P21091

LINE INKINDEX

parameter: points

to note

LINE INKINDEX

parameter

example

LINE LPI

Options

Table 4-33. LINE LPI parameter options and definitions

Option

DOTS

XDOTS (600 dpi)

The default unit is LPI.

Using LCDS Print Description Language