Xerox 701P21091 manual Summary of PDE command parameters, PDE Begin

Specifying print format parameters

PDE command parameters

The following table summarizes the PDE command parameters.

Table 4-83. Summary of PDE command parameters

Parameter	Specifies	Online	Offline	DJDE
PDE BEGIN	Specifies the location of the first print line on the	Y	Y	Y
	page.
PDE FONTS	Specifies the fonts to be used to print CME and	Y	Y	Y
	variable data.
PDE PMODE	Specifies whether the job will print with landscape or	Y	Y	Y
	portrait orientation.

The following sections describe the syntax of the PDE command parameters and explain the parameter options.

PDE BEGIN

Specifies the location of the starting print line of a logical page. It may be in inches (IN) or centimeters (CM).

Defining multiple Logical pages are user defined page images, each bordered by logical pages on a Top Of Form, Bottom Of Form, and left and right margins. To

physical page define multiple logical pages on one physical page (one side of a sheet), you code a separate PDE BEGIN parameter for each logical page you want to define.

You may define up to 63 logical pages for one physical page. You may define them in any order and place them on the physical page in the sequence that the BEGIN parameters appear in the PDE command. The first BEGIN specified, whatever its physical position on the page, is logical page one.

Syntax ac: PDE BEGIN = (vpos [unit], hpos [unit])

Using LCDS Print Description Language 4-93