Xerox 701P21091 manual Options 32. PCC Advtape parameter options and definitions, PCC Assign

Specifying input parameters

Table 2-31. Summary of PCC command parameters (Continued)

Parameter	Specifies	Online	Offline	DJDE
OFFSET	Location of record length field	Y	N	N
POSTAMBLE	Length of extraneous data at end of record	Y	N	N
STRUCTURE	Input record structure	Y	N	N

The following sections describe the syntax of the command parameters and explain their options.

PCC ADVTAPE

Specifies whether or not the carriage control advances to a new page when two successive channel skip parameters are issued with no intervening print.

For example, on most printers, the actions PSK1 (Print and Skip to Channel 1) followed by SK1N (Skip to Channel 1, Do Not Print) cause a blank page to be output. However, on a 1403 printer, these actions do not produce a blank page.

Syntax [ac:] PCC ADVTAPE = {YES NO}

Options

Table 2-32. PCC ADVTAPE parameter options and definitions

	Option		Definition
	YES		Specifies that multiple skips are honored.
	NO		Specifies that multiple skips result in only one skip action being taken.
Default		No default
PCC ADVTAPE		SK1P (skip to channel 1 and print) followed by a second SK1P
parameter: point		results in a page transition because printing occurred on the first
to note		page, even if only blanks were output.
		PCC ASSIGN
		Specifies printer carriage control exceptions to a default table
		(refer to the PCC DEFAULT parameter description).
Syntax		[ac:] PCC ASSIGN = {(byte, ccln) (byte, (ccln1 [, ccln2] [, ...])}

Using LCDS Print Description Language 2-31