Xerox 701P21091 manual Options 34. Rpage Test parameter options and definitions, Default TOP

Using logical processing

RPAGE TEST

Defines the test expression for detection of an RPAGE record that will cause the logical page to be repositioned on a physical page.

Syntax RPAGE TEST = testexp

Options

Table 3-34. RPAGE TEST parameter options and definitions

Option	Definition
testexp	test expression.
	Specifies the criteria test that, if met, will reposition the logical page.
	The logical page on which this record normally appears is called the “current
	logical page.”
	(Refer to “Coding a test expression,” earlier in this chapter, for the format and
	syntax of a test expression.)
Default		No default
		RPAGE WHEN
		Defines the portion of the current logical page that will be
		positioned to the first logical page of a new location.

Syntax RPAGE WHEN = {TOP BOTTOM NOW}

Options

Table 3-35. RPAGE WHEN parameter options and definitions

Option	Definition
BOTTOM	The logical page following the current logical page is repositioned.
NOW	The current record is repositioned. This record prints at TOF. Any spacing or
	skipping defined to occur before printing the current record is ignored.
TOP	The current logical page is repositioned.

Default TOP

Using LCDS Print Description Language 3-45