Xerox 701P21091 manual Options 89. Route Rtext parameter options and definitions

Specifying print format parameters

Options

Table 4-89. ROUTE RTEXT parameter options and definitions

	Option	Definition
	sc	string constant.
		Specifies the message to be printed (a string of 1 to 132 characters). It is
		printed with the first font specified in the FONTS parameter of the PDE
		command. (Refer to the fontindex option in this table).
	passnum	pass number.
		An integer specifying the single copy (pass) to which the text applies. If there is
		more than one RTEXT parameter in a DJDE packet, passnum must be in
		increasing numeric order.
	ALL	Specifies that the text applies to all copies.
	line	Specifies the line number on which the first line of a block of RTEXT message
		is printed. To avoid overprinting, only one RTEXT parameter may be specified
		per line for a passnum.
		The default is line 1 for the first text string of the pass. Otherwise, the default is
		the next line of the page.
	col	column.
		Specifies the column number at which the first character of a block of RTEXT
		messages is to be printed.
		The default is column 1.
	fontindex	Identifies the font index (starting with 1) of the PDE font with which the text is
		printed.
	rtextid	routing text identifier.
		References a catalogued file of RTEXT parameters previously compiled by
		XJDC.
	NONE	Specifies that no routing text will be printed on a separate page.
	Default	NONE
ROUTE RTEXT		• The font index is associated only with a particular string. To
parameter: points		print an entire RTEXT page in the same font, you must
	to note	specify the font index with each string. For strings without a
		fontindex specified, the system uses the first font (specified in
		the PDE FONTS parameter).
		• The positioning of the first line of data on the page following
		an RTEXT page is determined by font 0 of the current font
		list.
		• If more than one font is used to print any number of RTEXT
		strings on a page, the line and the character spacing values
		of the different fonts are used to place RTEXT on the page.

Using LCDS Print Description Language 4-101