Xerox 701P21091 manual Syntax for ccln definition, Space print parameters

Specifying input parameters

Syntax for ccln definition:

{field1[, field2 [, field3]] (field1 [, field2 [, field3]] [, {TOF OVR

IGN}])}

Options

Table 2-33. PCC ASSIGN parameter options and definitions

Option	Definition
byte	The printer carriage control byte that is being defined. Its value is in the range 0 to 255
	(X00 to XFF).
ccln	carriage control line number.
	Specifies the action that should be taken when the printer carriage control byte defined
	in the byte field is encountered.
	A ccln consists of the following:
	• Space print parameters
	This has the following components:
	–	field1	Specifies the carriage action to take before printing. (An example is the
			ANSI carriage control.)
		-	SPm Space m lines before printing.
		-	SKn Skip to channel n before printing.
	–	field2	Specifies whether printing occurs for this record:
		-	P Print the output data at the line number computed after field1 is
			processed.
		-	N No printing occurs for this record (default).
	–	field3	Specifies the carriage action to take after printing. (An example is the
			IBM1403 carriage control).
		- SPm Space m lines after printing.
		- SKn Skip to channel n after printing.

NOTE: Each of the three fields shown above is optional; however, you must specify at least one field. The range for variables m and n is 0 to 15.

•Bottom Of Form actions (optional)

–TOF

When spacing causes bottom of form (BOF) to occur, instructs the system to go to the top of form (TOF) on the next page and to stop spacing.

–IGN

When spacing causes the bottom of form (BOF) to occur, instructs the system to ignore it to continue spacing through the end of the physical page. The page then transitions to top of form and spacing continues.

–OVR (default)

When spacing causes bottom of form (BOF) to occur, instructs the system to go to the top of form (TOF) on the next page and to continue spacing.

Default No default

2-32 Using LCDS Print Description Language