Xerox 701P21091 manual Smplst JDL VFU

PDL principles and procedures

System defaults can be used for all other specifications, although typically each application has its own specific characteristics.

•Use tab spacing to create columns for the command identifiers, commands, and parameters in your JSLs. While not required by the system, this organization makes it much easier to identify command sets, their commands, and the parameters of each command quickly, reducing the chance of error.

The JSL in the following figure is set up in column format with tabs. Generally, only the JDL name, identifiers, and the END command begin in the first column of the JSL. Other commands are indented.

Table 1-9. Sample JSL

SMPLST:	JDL;
V1:	VFU	ASSIGN=(1,5), ASSIGN=(2,10),
		ASSIGN=(3,15), TOF=5, BOF=66;
	VOLUME	HOST=XEROX,CODE=EBCDIC,
		LABEL=NONE;
	RECORD	LENGTH=133, STRUCTURE=FB;
	LINE	DATA=(1,132), PCCTYPE=XEROX,
		PCC=(0,NOTRAN), VFU=V1;
T1:	TABLE	CONSTANT= (132) '*';
C1:	CRITERIA	CONSTANT=(2,132,EQ,T1),
		LINENUM=(1,5);
CME1:	CME	LINE=(9,–), POS=1, FONT=1;
JOB1:	JDE;
	OUTPUT	DUPLEX=YES, FORMS=BARS,
		MODIFY=CME1;
JOB2:	JDE;
	OUTPUT	FORMS=NONE, DUPLEX=NO, COPIES=2;
JOB3:	JDE;
	BANNER	TEST=C1, HCOUNT=1, TCOUNT=0;
END;

1-48 Using LCDS Print Description Language