Xerox 701P21091 manual Summary of Message command parameters, Message Itext

Specifying print format parameters

MESSAGE command parameters

The following table summarizes the MESSAGE command parameters.

Table 4-39. Summary of MESSAGE command parameters

Parameter	Specifies	Online	Offline	DJDE
MESSAGE ITEXT	Specifies that a message to the operator will be	Y	Y	Y
	displayed during input processing.
MESSAGE OTEXT	Specifies that a message to the operator will be	Y	Y	Y
	displayed during printing.

The following sections describe the syntax of the command parameters and explain the parameter options.

MESSAGE ITEXT

(“Input text”) Specifies a text message to be sent to the operator during input processing.

Syntax MESSAGE ITEXT = {(sc [, passnum]) NONE WAIT}

Options

Table 4-40. MESSAGE ITEXT parameter options and definitions

Option	Definition
NONE	Specifies that no text message is sent to the operator during input processing.
passnum	pass number
	Specifies the pass (copy ply) to which the message text applies. The message
	is sent to the operator just before processing of the indicated pass is begun. If
	no pass number is specified, the indicated message is sent at the beginning of
	the first pass.
sc	string constant
	Specifies a text message (string constant) of up to 80 characters.
WAIT	Specifies that after the text is displayed, input is suspended until the operator
	has initiated a Continue request.
	NOTE: The DP EPS systems do not support the ITEXT WAIT parameter. It is
	ignored, and no error message is displayed.

Default NONE

Using LCDS Print Description Language 4-39