Xerox 701P21091 manual Oriented DJDEs, Accounting log. You can print out the values

Using Dynamic Job Descriptor Entries (DJDEs)

•If DJDEs are located at the start of a report, they invoke changes beginning with the first page of the report (or report copy).

	Table 5-4. Page oriented DJDEs
DJDE	Function
BEGIN	Specifies the location of the starting print line of each logical page.
BFORM	Specifies that a form will be printed on the back side of each printed
	page.
COLLATE	Specifies whether the pages of a job are to be collated (placed into sets
	ordered the way the pages are printed) or uncollated (all copies of a
	page are placed together).
COPIES	Specifies the number of copies of the pages (also called sets) to
	produce.
DEPT	Specifies the name under which accounting statistics for reports are
	accumulated.
	NOTE: The DP 2000 Series EPS place this information in the
	accounting log. You can print out the values.
DESTINATION	Specifies the output destination of printed pages.
DUPLEX	Specifies whether both sides of a piece of paper are printed (duplex) or
	only the top side (simplex). (Simplex and duplex are also called “1-sided”
	and “2-sided.”
FEED	Controls the stock on which pages are printed.
FONTINDEX	Specifies the location in the input record where an index to the specified
	font is stored.
FONTS	Specifies the fonts used for printing.
FORMAT	Specifies a new page descriptor entry (PDE) to use for formatting
	control.
FORM[S]	Specifies the form to be merged onto the printed pages.
ICATALOG	Specifies an ink catalog that contains palettes and inks for subsequent
	pages.
IDFAULT	Specifies a default ink for objects for which no ink was specified.
IDR	Specifies the ink descriptor reference (IDR) that will be used for
	subsequent pages.
ILIST	Specifies a list of all the inks that may be referenced by the ink index on
	the page.
INKINDEX	Specifies a field within a data record that contains a number
	representing the ink index in the current ILIST.
INVERT	Specifies that the subsequent page content will be inverted 180 degrees
	on the physical page.

Using LCDS Print Description Language 5-11