Xerox 701P21091 manual Correcting errors in a JSL

PDL principles and procedures

Correcting errors in a JSL

If errors are encountered in a JSL while it is being compiled, the following message appears in the Terminal window:

**********JSL CONTAINS ERROR(S)**********

Figure 1-20. Terminal window displaying compiling messages for a JSL with errors

The system does not create a .JDL file in the “lcds” folder, but it does create a .LST file, which shows where the errors are.

1.Open and inspect the .LST file to locate the errors that prevented the JSL from compiling.

To open a .LST file:

a.Open a UNIX Text Editor window. (Refer to “Full JSL coding procedure,” earlier in this chapter, for instructions.)

b.From the File menu on the Text Editor window, select [Open] to display the Text Editor – Open a File window.

Using LCDS Print Description Language 1-69