Lucent Technologies Release 6 manual Check Customer’s Order, Correcting Shipping Errors

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998

1Install and Connect Cabinets

Check Customer’s Order Page 1-2

Unpack and Inspect Auxiliary Cabinet

The Auxiliary cabinet is normally positioned adjacent to the PPN cabinet or the

EPN cabinet, if provided.

1.Unpack the cabinets as outlined on the previous page.

2.Remove the lower rear panel from the Auxiliary cabinet. Install the lower rear panel when the installation is completed.

Unpack and Inspect Stratum 3 Clock Cabinet

1.Check the status of the SHOCKWATCH and/or TILTWATCH indicators on the cardboard container. If the container has been jarred or tilted beyond specifications, the indicators are red, indicating possible damage.

2.Remove all packing material.

3.Remove front door and rear screw-on panels from the cabinet.

4.Inspect the cabinet for damage. Report any damage per local instructions.

Check Customer’s Order

1.Check the customer’s order and the shipping packing lists to confirm all equipment is present. If any equipment is missing, report the information to your Lucent Technologies representative.

2.Ensure all circuit packs are fully inserted into the proper slots according to the Customer Service Document (CSD). Report any discrepancies in circuit pack type or quantity to your Lucent Technologies representative.

3.Check the system adjuncts for damage and report all damage according to local shipping instructions.

Correcting Shipping Errors

1.Red-tag all defective equipment and over-shipped equipment and return per the nearest Material Stocking Location (MSL) instructions. For international customers, contact your order service agent.

2.Direct all short-shipped reports to the nearest MSL. Contact the appropriate location for specific instructions. For Streamlined Implementation in the United States, call 1-800-772-5409.