Lucent Technologies Release 6 manual Test Expansion Interface Circuit Packs

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998
4 Test the System
Test Expansion Interface Circuit Packs	Page 4-8

Test Expansion Interface Circuit Packs

1.Verify the screen displays: Command:

2.Type test board < UUCCss> (where UUCCss is the cabinet, carrier, and slot for an expansion interface circuit pack in the system) and press Enter. Labels on the port network and carrier containing the board and the label on the strip under the board contain this information.

NOTE:

Circuit pack positions are usually given by cabinet, carrier (within cabinet), and slot (within carrier). They may also be given by port (within slot). The term “cabinet” refers to one Multi-Carrier Cabinet making up one port network. A port network is defined as a group of cabinets connected together with one TDM bus.

3.Verify the screen displays test results similar to Screen 4-7. This example is for circuit pack 1C03.

Screen 4-7. Example Test Board 1C03

4.If any result is FAIL, check the connections for the associated fiber optic link.

5.Repeat Steps 2 and 3 for each circuit pack in the system.